flynx/photobook
1
0
Fork 0
mirror of https://github.com/flynx/photobook.git synced 2025-11-03 21:00:18 +00:00
Code Issues Packages Projects Releases Wiki Activity
photobook/photobook.cls
Alex A. Naanou 07c6310ffd better defaults + minor fixes + notes... 
Signed-off-by: Alex A. Naanou <alex.nanou@gmail.com>
2023-02-25 12:46:21 +03:00

5120 lines
151 KiB
TeX
Raw Blame History

%----------------------------------------------------------------------
%
%
% This does the following:
% - sets up the document/pdf for viewing as a book
% - adds support for page bleeds
% - adds basic templates for image pages
%
%
% This file contains both the code and the reference, but in a slightly
% more readable format than the traditional LaTeX .dtx format. In general
% there are two main sections:
% - code
% - reference
% lines starting with "%%" or "%X" where X is a section id
% Sections are parts of the reference that are logically ordered differently
% than the code, e.g. main user tools should have priority in the reference
% while meta code (identified by "%M") can be described later, while in code
% we strictly need to define macros before they are used thus meta-macros
% and other building blocks and components come before the user tools.
%
% Docs are built by the Makefile, so reference it for more info.
%
% To make the reference use:
% $ make pdf
%
%
% NOTE: in a stripped code install this file may contain only code and
% code comments, in this case, to see the docs refer to either the
% source or the actual documentation/pdf.
% NOTE: the stripped code file is auto-generated, it is not recommended
% to edit it directly, edit the source instead.
%
%
% XXX revise \clearcaption / \captionclearpage...
% XXX unify API -- see CellContent env...
% XXX make this loadable both as a class and as a package...
% \@ifclassloaded{photobook}{<true>}{<false>}
% XXX revise command naming -- should be obvious from name what is what:
% - meta commands -- ??? (currently same as templates)
% - general macros -- \usecell{..}
% - templates -- \ImagePage{..}
% XXX see where we need to \ignorespaces...
% XXX might be a good idea to add a spine calculator...
% XXX might be fun to add a 'box' layout to build book boxes...
% XXX add a grid cell / image cell (???)
% make it trivial to define AxB cell layouts and fill them (fully/partially)
% XXX manual / book:
% - basic usage
% - setup
% - templates (copyright, front matter, back matter, acknowledgements, ...)
% - using templates
% - pre-print
% - customizing
% - extending
%
%
%----------------------------------------------------------------------
%%% NOTE: \def\<module-name>@[A-Z]+ macros will be visible to both the
%%% code and the generated docs...
\edef\photobook@FILEVERSION{v0.1.6}
\edef\photobook@FILEDATE{2023-01-17}
%% \documentclass{ltxdoc}
%%
%%% \usepackage{iftex}
%%% \ifluatex
%%% \edef\pdfcompresslevel{\pdfvariable compresslevel}
%%% \edef\pdfobjcompresslevel{\pdfvariable objcompresslevel}
%%% \fi
%%% \pdfcompresslevel 0
%%% \pdfobjcompresslevel 0
%%
%% \usepackage[a4paper,margin=25mm,left=55mm,nohead]{geometry}
%%
%% % NOTE: this needs to load before hyperref or bookmarks will break...
%% % NOTE: loading hyperref here will break it loading later in one of
%% % the packages...
%% \usepackage{titlesec}
%%
%% \usepackage[numbered]{hypdoc}
%% \usepackage{doctools}
%% \usepackage{needspace}
%%
%% \usepackage[toc]{multitoc}
%% \renewcommand*{\multicolumntoc}{2}
%% \setlength{\columnseprule}{0.5pt}
%%
%% \usepackage{imakeidx}
%% \makeindex[
%% columns=1,
%% title=Alphabetical Index,
%% intoc,
%% options= -s photobook.ist ]
%%
%%% \newcommand\DescribeGlobal[1]{%
%%% \DescribeMacro{#1}}
%%
%% \newcommand\LEGACY[1][]{\fbox{LEGACY #1}}
%% \newcommand\EXPERIMENTAL[1][]{\fbox{EXPERIMENTAL #1}}
%%
%%% sections to new pages...
%% \newcommand\sectionbreak{\Needspace{5\baselineskip}}
%%
%% % remove section numbering...
%% \setcounter{secnumdepth}{0}
%%
%% % paragraph configuration...
%% \setlength\parindent{0pt}
%% \setlength\parskip{0.5em}
%%
%% \newcommand\blankfootnote[1]{%
%% \begingroup
%% \renewcommand\thefootnote{}%
%% \footnote{#1}%
%% \addtocounter{footnote}{-1}%
%% \endgroup}
%%
%%
%% \begin{document}
%%
%% \title{\textsf{photobook} --- Document class for building photo-books
%% \thanks{This file describes version \FILEVERSION,
%% last revised \FILEDATE.}}
%%
%% \author{Alex A. Naanou\thanks{E-mail: alex.nanou@gmail.com}}
%%
%% \date{Released \FILEDATE}
%%
%%
%% \maketitle
%%
%% \begin{abstract}
%% The |photobook| \LaTeX\space document class extends the |book| class
%% defining a set of parameters, meta-macros, macros and environments
%% with reasonable defaults to help typeset, build and print books mainly
%% based on visual/image content.
%% \end{abstract}
%%
%% \tableofcontents
%%
%
%%%% Introduction
%
%% \LaTeX\ is great with textual and text-primary content with figures
%% peppered in, as long as pictures/figures flow within, with or as part
%% of text, vanilla \LaTeX\ is fantastic.
%%
%% One can relatively easily stretch the flow concept to more complex
%% layouts introducing {\it even} and {\it odd} pages (the |book| class is
%% one example) and flow rules based on them, but the next step, {\it bleeds},
%% combining page pairs into {\it spreads} as is often needed when designing
%% image-oriented books is lacking. Full-bleed images/pages can be implemented
%% manually, some more effort is needed to split something horizontally
%% into a page spread, but doing so for whole book's worth of content is
%% not practical -- automating and experimenting with this process is
%% how |photobook| began.
%%
%% |photobook| extends the |book| class adding page layout types, bleeds
%% and other global geometry configuration, introduces the {\it page} and
%% {\it spread} as first-class elements into the document flow. These concepts
%% are generalized as |cell|s. A |cell| is similar to a figure, it can
%% be placed within the document flow, but unlike a figure a |cell| can
%% be aligned relative to a page, it can fill a page, a cell can even be
%% horizontally split to fill several pages (how spreads are implemented).
%%
%% On top of the |cell|, {\it page}, and {\it spread} concepts, |photobook|
%% also builds a set of configurable high level macros and templates for
%% common use cases like full bleed image spreads, foldouts, ... etc.
%
%
%%%% Usage
%
%% >> \documentclass[<options>]{photobook}
%%
%
%----------------------------------------------------------------------
\NeedsTeXFormat{LaTeX2e}
\ProvidesClass{photobook}
[\photobook@FILEDATE \space \photobook@FILEVERSION Photo book document class]
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%% Options
%%
\edef\photobook@options{\@classoptionslist}
\RequirePackage{kvoptions}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
% Helpers...
\newcommand\@DeclareLiteralOptionTo[2]{%
\DeclareVoidOption{#2}{%
\expandafter\edef\csname photobook@#1\endcsname{#2}}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Page geometry
%
%% \DescribeMacro{blockwidth=<len>}
%% \DescribeMacro{blockheight=<len>}
%% \DescribeMacro{bindingoffset=<len>}
%% \DescribeMacro{bleed=<len>}
%
%% This is similar to what |geometry| does, but adds bleed support.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% <---> bleed <---> bleed
%%
%% + - - - - - - - - - - - - - - - - - - - - - + - + ^
%% . . . | bleed
%% . +---------------------------------------+----- v . . ---
%% . | ^ . = .
%% . | . . . . . . | . . = . ^
%% . |<-- blockwidth ----------------------->= . |
%% . | . | . . = . |
%% . | | . = . textheight
%% . | . Page | . . = . |
%% . | blockheight . = . |
%% . | . | . . = . |
%% . | | <---> bindingoffset |
%% . | . . . . . . | . . = . v
%% . | v . = .
%% . +---------------------------------------+----- ^ . . ---
%% . . . . | bleed
%% + - - - - - - - - - - - - - - - - - - - - - + - + v
%% . .
%% | <-- textwidth --------------> . |
%% ^ gutter
%%
%% \end{verbatim}
%% \end{minipage}
%%
% NOTE: if blockwidth/blockheight are set they will force recalculations
% and overriding of the paperwidth/paperheight if they were changed
% by the user code anywhere between \documentclass[..]{photobook}
% and \begin{document}...
\DeclareStringOption{blockwidth}
\DeclareStringOption{blockheight}
\DeclareStringOption[0pt]{bindingoffset}[10mm]
\DeclareStringOption[5mm]{bleed}[5mm]
%% \DescribeMacro{flatfold=<len>}
%
%% Sets the clearance set aside for a flat fold, used for foldouts
%% (see: \nameref{subsec:Foldout page cells} section).
%%
\DeclareStringOption[0pt]{flatfold}[0.2mm]
%% \DescribeMacro{pagefold=<fold>}
%
%% Sets the default fold type.
%%
%% Can be |in| or |out|.
%%
% XXX check values...
\DeclareStringOption{pagefold}
%% \DescribeMacro{foldout=<fold-spec>}
%
%% Sets the default fold specification (i.e. sets |\defaultfoldout|).
%%
%% For more information see: \nameref{subsec:Foldout page cells} section.
%%
\DeclareStringOption[2]{foldout}[2]
%%%%% layout
%
%% \DescribeMacro{layoutmode=<layout>}
%% \DescribeMacro{block}
%% \DescribeMacro{endpaper}
%% \DescribeMacro{cover}
%% \DescribeMacro{jacket}
%
%% Sat page layout mode.
%
%% >> layoutmode=<option>
%%
%% |block| (default)
%%
%% Basic page layout.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% blockwidth
%% <--------------->
%%
%% +---------------+
%% | |
%% | |
%% | page |
%% | |
%% | |
%% +---------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
%%
%% |endpaper|:
%%
%% Endpaper layout.
%%
% XXX should this use \flatfold???
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% blockwidth 2x
%% <------------------------------->
%%
%% +---------------+---------------+
%% | . |
%% | . |
%% | endpaper |
%% | . |
%% | . |
%% +---------------+---------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
%%
%% |cover|
%%
%% Book cover layout
%%
%% \DescribeMacro{coverboardgrow=<len>}
%% \DescribeMacro{coverflap=<len>}
%% \DescribeMacro{spinewidth=<len>}
%% \DescribeMacro{spinewidth=<len>}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% blockwidth blockwidth
%% <---------------> <--------------->
%% <-> coverboardgrow <-> coverboardgrow
%% <-> coverflap . <-> coverflap
%% . . . . . .
%% +-------------------++---++-------------------+ ---
%% | + - - - - - - - - ++ - ++ - - - - - - - - + | --^ coverflap
%% | . + - - - - - - - ++ - ++ - - - - - - - + . | --^ coverboardgrow
%% | . . .. .. . . | ^
%% | . . .. .. . . | | blockheight
%% | . . Back .. .. Front . . | |
%% | . . .. .. . . | |
%% | . . .. .. . . | v
%% | . + - - - - - - - ++ - ++ - - - - - - - + . | --v coverboardgrow
%% | + - - - - - - - - ++ - ++ - - - - - - - - + | --v coverflap
%% +-------------------++---++-------------------+ ---
%% . .
%% ^. .^ spinefold
%% . .
%% <---> spinewidth
%%
%% \end{verbatim}
%% \end{minipage}
%%
%%
%% |jacket|
%%
%% Dust jacket layout
%%
%% \DescribeMacro{jacketwrap=<len>}
%% \DescribeMacro{jacketflap=<len>}
%% \DescribeMacro{jacketflapfront=<len>}
%% \DescribeMacro{jacketflapback=<len>}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% <---> jaketflap/jacketflapback <---> jaketflap/jacketflapfront
%% . . . .
%% . . blockwidth blockwidth . .
%% . . <---------------> <---------------> . .
%% . .<-> coverboardgrow <-> coverboardgrow
%% . . . . . .
%% +---++-----------------++---++-----------------++---+ ---
%% | .. + - - - - - - - ++ - ++ - - - - - - - + .. | --^ coverboardgrow
%% | .. . .. .. . .. | ^
%% | .. . .. .. . .. | | blockheight
%% | .. . Back .. .. Front . .. | |
%% | .. . .. .. . .. | |
%% | .. . .. .. . .. | v
%% | .. + - - - - - - - ++ - ++ - - - - - - - + .. | --v coverboardgrow
%% +---++-----------------++---++-----------------++---+ ---
%% .. . . ..
%% ^ jacketwrap . . ^ jacketwrap
%% ^. .^ spinefold
%% . .
%% <---> spinewidth
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Note that for |cover|, |endpaper|, and |jacket|,
%% \href{https://ctan.org/pkg/fancyhdr}{fancyhdr}'s |\pagestyle{..}| is
%% set to |empty| by default.
%%
%
% XXX in cover layout setup pdf boxes in a way to use \bleed as foldover...
% ...see hyperref docs to set pdf view/print area (???)
% .....should also set \bleed default to something like 17mm
% XXX do we need to implement cover fold over???
% XXX fold/cut marks???
\DeclareStringOption[block]{layoutmode}[block]
\@DeclareLiteralOptionTo{layoutmode}{block}
%\@DeclareLiteralOptionTo{layoutmode}{web}
\@DeclareLiteralOptionTo{layoutmode}{endpaper}
% XXX add overhang...
% XXX minght be a good idea to add cover types as separate values and
% preset defeaults per type, e.g:
% layoutmode= hardcover softcover
% should also set:
% spinefold= 5mm 5mm
% coverflap= 17mm 0mm
% bleed= 0mm 5mm
\@DeclareLiteralOptionTo{layoutmode}{cover}
%\@DeclareLiteralOptionTo{layoutmode}{hardcover}
%\@DeclareLiteralOptionTo{layoutmode}{softcover}
\@DeclareLiteralOptionTo{layoutmode}{jacket}
% NOTE: this is only used when layoutmode=cover
% NOTE: these are documented inline with layoutmode=.. docs...
\DeclareStringOption[0pt]{spinewidth}[0pt]
\DeclareStringOption[0pt]{spinefold}[7mm]
\DeclareStringOption[0pt]{coverboardgrow}[3mm]
\DeclareStringOption[0pt]{coverflap}[17mm]
\DeclareStringOption[0pt]{jacketwrap}[2mm]
\DeclareStringOption[0pt]{jacketflap}[50mm]
\DeclareStringOption[0pt]{jacketflapfront}[50mm]
\DeclareStringOption[0pt]{jacketflapback}[50mm]
%%%%% Image clearance
%
%% \DescribeMacro{clearimage=<len>}
%
%% Distance from image to paper border (clearance) for full-page images.
%%
%% this can be:
%% - negative value set image bleed,
%% - positive value set distance from paper edge to image.
%%
\DeclareStringOption{clearimage}[10mm]
%%%%% Image block layout
%
%% \DescribeMacro{imageblockwidth=<len>}
%% \DescribeMacro{imageblockheight=<len>}
%% \DescribeMacro{imageblockoffsettop=<len>}
%
%% Image block size relative to text block.
%%
\DeclareStringOption[0.85]{imageblockwidth}[1]
\DeclareStringOption[0.85]{imageblockheight}[1]
\DeclareStringOption[-0.05]{imageblockoffsettop}[0]
%%%%% PDF Viewer layout
%
%% \DescribeMacro{pdfpagelayout=<mode>}
%% \DescribeMacro{SinglePage}
%% \DescribeMacro{OneColumn}
%% \DescribeMacro{TwoColumnLeft}
%% \DescribeMacro{TwoColumnRight}
%% \DescribeMacro{TwoPageLeft}
%% \DescribeMacro{TwoPageRight}
%
%% Sets PDF page display mode.
%%
%% Defaults to |TwoColumnLeft| for |layoutmode=block| and |SinglePage| for
%% other modes.
%%
%% See:
%% \href{https://ctan.altspu.ru/macros/latex/contrib/hyperref/doc/hyperref-doc.pdf}{hyperref}'s
%% |pdfpagelayout| for more options.
%%
\DeclareStringOption{pdfpagelayout}
\@DeclareLiteralOptionTo{pdfpagelayout}{SinglePage}
\@DeclareLiteralOptionTo{pdfpagelayout}{OneColumn}
\@DeclareLiteralOptionTo{pdfpagelayout}{TwoColumnRight}
\@DeclareLiteralOptionTo{pdfpagelayout}{TwoColumnLeft}
\@DeclareLiteralOptionTo{pdfpagelayout}{TwoPageRight}
\@DeclareLiteralOptionTo{pdfpagelayout}{TwoPageLeft}
%%%%% Other options
%
%% \DescribeMacro{nofoldmarks}
%
%% If given disable fold marks.
%%
%% This sets |\iffoldmarks| to false, otherwise it is set to true.
%%
\DeclareBoolOption{nofoldmarks}
%% \DescribeMacro{foldmarksize=<len>}
%
%% Sets the fold mark size (default: 6mm).
%%
\DeclareStringOption[6mm]{foldmarksize}
%% \DescribeMacro{geometrynodefaults}
%
%% let the user set geometry defaults.
%%
%% If this is not set |photobook| will override some user settings when
%% initializing geometry.
%%
%% If set |photobook| will only set override:
%% \begin{verbatim}
%% paperwidth=\bleedblockwidth
%% paperheight=\bleedblockheight
%% bindingoffset=\bindingoffset
%% \end{verbatim}
%%
\DeclareBoolOption{geometrynodefaults}
%% \DescribeMacro{roundprintedlengthsto=<num>}
%
%% Number of digits to round printed lengths to (default: 1).
%%
%% This is a shorthand to |numprint|'s |\nprounddigits{..}|, us it to
%% change values mid-document if needed.
%%
%% This is mostly used for |\GenerateTemplate|.
%%
\DeclareStringOption[1]{roundprintedlengthsto}[1]
\DeclareDefaultOption{\PassOptionsToClass{\CurrentOption}{book}}
\ProcessKeyvalOptions*
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
% Parent class...
%
\LoadClass[9pt, final, openany]{book}
%----------------------------------------------------------------------
%%%% Packages
%
%% |photobook| adds and uses internally the following packages:
%
% NOTE: imports are after \LoadClass{ .. } to avoid fighting over macro
% names...
%% \href{https://ctan.org/pkg/geometry}{geometry},
%% \href{https://ctan.org/pkg/kvoptions}{kvoptions},
%% \href{https://ctan.org/pkg/calc}{calc},
\RequirePackage{calc}
%% \href{https://ctan.org/pkg/xargs}{xargs},
\RequirePackage{xargs}
%% \href{https://ctan.org/pkg/ifthen}{ifthen},
\RequirePackage{ifthen}
%% \href{https://ctan.org/pkg/iftex}{iftex},
\RequirePackage{iftex}
%% \href{https://ctan.org/pkg/pgffor}{pgffor},
\RequirePackage{pgffor}
%% \href{https://ctan.org/pkg/xint}{xint},
\RequirePackage{xint}
%% \href{https://ctan.org/pkg/xinttools}{xinttools},
\RequirePackage{xinttools}
%% \href{https://ctan.org/pkg/listofitems}{listofitems},
\RequirePackage{listofitems}
%% \href{https://ctan.org/pkg/xkeyval}{xkeyval},
\RequirePackage{xkeyval}
%% \href{https://ctan.org/pkg/etoolbox}{etoolbox},
\RequirePackage{etoolbox}
%% \href{https://ctan.org/pkg/atbegshi}{atbegshi},
\RequirePackage{atbegshi}
%\RequirePackage{afterpage}
%\RequirePackage{changepage}
%% \href{https://ctan.org/pkg/hyperref}{hyperref},
\RequirePackage[unicode]{hyperref}
%\RequirePackage{pdfcomment}
%% \href{https://ctan.org/pkg/eso-pic}{eso-pic},
\RequirePackage{eso-pic}
%% \href{https://ctan.org/pkg/environ}{environ},
\RequirePackage{environ}
%% \href{https://ctan.org/pkg/numprint}{numprint},
\RequirePackage{numprint}
%% \href{https://ctan.org/pkg/trimclip}{trimclip},
\RequirePackage{trimclip}
%% \href{https://ctan.org/pkg/xcolor}{xcolor},
\RequirePackage{xcolor}
%% \href{https://ctan.org/pkg/pagecolor}{pagecolor},
\RequirePackage{pagecolor}
%% \href{https://ctan.org/pkg/colorspace}{colorspace},
\RequirePackage{colorspace}
%% \href{https://ctan.org/pkg/graphicx}{graphicx},
\RequirePackage{graphicx}
%% \href{https://ctan.org/pkg/adjustbox}{adjustbox},
\RequirePackage{adjustbox}
%% \href{https://ctan.org/pkg/adjustbox}{adjustbox},
\RequirePackage[absolute]{textpos}
%% \href{https://ctan.org/pkg/fancyvrb}{fancyvrb},
\RequirePackage{fancyvrb}
%% \href{https://ctan.org/pkg/tikz}{tikz},
\RequirePackage{tikz}
%\RequirePackage[linewidth=1pt]{mdframed}
% XXX flow text frames...
% XXX this messes with geometry....
%\RequirePackage{flowfram}
%% \href{https://ctan.org/pkg/rotating}{rotating},
\RequirePackage{rotating}
%% \href{https://ctan.org/pkg/fancyhdr}{fancyhdr}, and
\RequirePackage{fancyhdr}
%% \href{https://ctan.org/pkg/pdfpages}{pdfpages}.
\RequirePackage{pdfpages}
%% \newline
%% Most of these packages can be used by the book author without explicitly
%% importing them.
%%
%----------------------------------------------------------------------
%%%% Globals
% XXX move these out to relevant sections + add a separate globals glossary...
%
% NOTE: most of these are setup in \InitPages...
%%% \DescribeGlobal{layoutmode}
%% \DescribeMacro{\layoutmode=<mode>}
%
%% Layout mode
%%
\edef\layoutmode{\photobook@layoutmode}
% layout mode tests...
\newif\ifcoverlayout
\newif\ifhardcoverlayout
\newif\ifsoftcoverlayout
\newif\ifendpaperlayout
\newif\ifjacketlayout
% aggregates...
\newif\ifcoverlikelayout
\newif\ifblocklayout
%% \DescribeMacro{\pdfpagelayout=<mode>}
%
%% Controls the default layout in the pdf viewer.
%%
\edef\pdfpagelayout{\photobook@pdfpagelayout}
%% \DescribeMacro{\spinewidth=<len>}
%
%% Spine width
%%
\newlength\spinewidth
\setlength\spinewidth{\photobook@spinewidth}
%% \DescribeMacro{\spinefold=<len>}
%
%% Spine fold width
%%
\newlength\spinefold
\setlength\spinefold{\photobook@spinefold}
%% \DescribeMacro{\coverboardgrow=<len>}
%
%% Controls how much biger the cover board is than the page block
%%
\newlength\coverboardgrow
\setlength\coverboardgrow{\photobook@coverboardgrow}
%% \DescribeMacro{\coverflap=<len>}
%
%% Cover flap
%%
\newlength\coverflap
\setlength\coverflap{\photobook@coverflap}
%% \DescribeMacro{\jacketwrap=<len>}
%% \DescribeMacro{\jacketflap=<len>}
%% \DescribeMacro{\jacketflapfront=<len>}
%% \DescribeMacro{\jacketflapback=<len>}
%
%% Jacker configuration
%%
\newlength\jacketwrap
\setlength\jacketwrap{\photobook@jacketwrap}
\newlength\jacketflap
\setlength\jacketflap{\photobook@jacketflap}
\newlength\jacketflapfront
\setlength\jacketflapfront{\photobook@jacketflapfront}
\newlength\jacketflapback
\setlength\jacketflapback{\photobook@jacketflapback}
%% \DescribeMacro{\blockwidth=<len>}
%% \DescribeMacro{\blockheight=<len>}
%
%% Page block size
%%
% NOTE: page and bleed block sizes are set via \InitPages
\newlength\blockwidth
\newlength\blockheight
%% \DescribeMacro{\bleedblockwidth=<len>}
%% \DescribeMacro{\bleedblockheight=<len>}
%
%% Page block size with bleeds
%%
%% These are equivalent to |\paperwidth| and |\paperheight| but are
%% independent of them...
%%
\newlength\bleedblockwidth
\newlength\bleedblockheight
%% \DescribeMacro{\pageblockwidth=<len>}
%% \DescribeMacro{\pageblockheight=<len>}
%
%% Original page block size
%%
%% for the block layout these are the same as |\blockwidth| and |\blockheight|
%% for other layouts these are the original page layout size while the
%% |\blockwidth| are set tho the current layout visible size.
%%
\newlength\pageblockwidth
\newlength\pageblockheight
%% \DescribeMacro{\bleed=<len>}
%
%% Page bleed size
%%
\newlength\bleed
\setlength\bleed{\photobook@bleed}
%% \DescribeMacro{\bindingoffset=<len>}
%
%% Binding offset
%%
\newlength\bindingoffset
\setlength\bindingoffset{\photobook@bindingoffset}
%% \DescribeMacro{\defaultfoldout=<fold-spec>}
%
%% Set the default fold specification.
%%
%% This can be set via the |foldout| class option.
%%
%% For more information see: \nameref{subsec:Foldout page cells} section.
%%
\edef\defaultfoldout{\photobook@foldout}
%% \DescribeMacro{\flatfold=<len>}
%
%% Sets the amount of paper to account for a flat fold.
%%
\newlength\flatfold
\setlength\flatfold{\photobook@flatfold}
%% \DescribeMacro{\pagefold=<fold>}
%
%% Default fold type.
%%
%% This defaults to |out| for |jacket| and |cover| and to |in| for other
%% layouts.
%%
\newcommand\photobook@setpagefold[1]{%
\edef\pagefold{
\ifx \photobook@pagefold \empty%
#1%
\else%
\photobook@pagefold\fi}}
\photobook@setpagefold{in}
%% \DescribeMacro{\foldmarkoffset=<len>}
%
%% Sets the offset of fold marks from outside of page edge (default: |0.5\bleed|).
%%
%% Note that this can either be a command or a dimension.
%%
%\def\foldmarkoffset{0.5\bleed}
\def\foldmarkoffset{2mm}
%% \DescribeMacro{\foldmarksize=<len>}
%
%% Sets fold marker size (vertical).
%%
\newlength\photobook@foldmarklen
\setlength\photobook@foldmarklen{\photobook@foldmarksize}
%% \DescribeMacro{\iffoldmarks}
%
%% Disable/enable fold marks.
%%
%% The default is true, to toggle on/off use |\foldmarkstrue| / |\foldmarksfalse|.
%%
%% This can be set globally via the |nofoldmarks| class option.
%%
\newif\iffoldmarks
\ifphotobook@nofoldmarks%
\foldmarksfalse%
\else%
\foldmarkstrue\fi%
%% \DescribeMacro{\clearimage=<len>}
%
%% Image clearance
%%
% NOTE: since this can be any number but we need to detect if it was set
% manually we'll set it to \maxdimen and hope noe will print
% something big enough and dare to use it as image clearance...
\newlength{\clearimage}
\setlength\clearimage{\maxdimen}
%% \DescribeMacro{\imageblockwidth=<ratio>}
%% \DescribeMacro{\imageblockheight=<ratio>}
%
%% Image block width relative to |\textwidth|
%%
\edef\imageblockwidth{\photobook@imageblockwidth}
\edef\imageblockheight{\photobook@imageblockheight}
%% \DescribeMacro{\pagetextwidth=<len>}
%% \DescribeMacro{\pagetextheight=<len>}
%
%% Root page text width/height.
%%
\newlength\pagetextwidth
\setlength\pagetextwidth{\textwidth}
\newlength\pagetextheight
\setlength\pagetextheight{\textheight}
%% \DescribeMacro{\imageblockoffsettop=<ratio>}
%
%% The ration by which the image is raised in |\ImagePage{..}| and
%% derived templates.
%%
\edef\imageblockoffsettop{\photobook@imageblockoffsettop}
%% \DescribeMacro{\clearcaption=<len>}
%
%% Block caption clearance from edge of parent cell.
%%
%% Used as default by |\captionblockcell{..}|
%%
% XXX do we need this???
\newlength\clearcaption
\setlength\clearcaption{0pt}
%% \DescribeMacro{\captioncellspacing=<len>}
%
%% Block caption spacing from parent cell.
%%
%% Used as default by |\captionblockcell{..}|
%%
% XXX should this be used in other caption cells???
\newlength\captioncellspacing
\setlength\captioncellspacing{5pt}
%% \DescribeMacro{\captionclearpage=<len>}
%
%% The distance between a caption block on a template page and page
%% borders (defaults to: |\clearimage|).
%%
%% This is relevant only in page/spread templates.
%%
\def\captionclearpage{\clearimage}
%% \DescribeMacro{\cellparentwidth=<len>}
%% \DescribeMacro{\cellparentheight=<len>}
%% \DescribeMacro{\cellwidth=<len>}
%% \DescribeMacro{\cellheight=<len>}
%% \DescribeMacro{\celloffsetleft=<len>}
%% \DescribeMacro{\celloffsettop=<len>}
%% \DescribeMacro{\clearance=<len>}
%
%% Cell geometry.
%%
%% These are set automatically by cells, thus it is not recommended to
%% edit them manually.
%%
%% For more details see the \nameref{subsec:Cells} section.
%%
\newlength\cellparentwidth
\setlength\cellparentwidth{\paperwidth}
\newlength\cellparentheight
\setlength\cellparentheight{\paperheight}
\newlength\cellwidth
\setlength\cellwidth{\cellparentwidth}
\newlength\cellheight
\setlength\cellheight{\cellparentheight}
\newlength\celloffsetleft
\setlength\celloffsetleft{0pt}
\newlength\celloffsettop
\setlength\celloffsettop{0pt}
\newlength\clearance
\setlength\clearance{0pt}
%% \DescribeMacro{\clearfoldoutbinding=<len>}
%% \DescribeMacro{\clearfoldoutfold=<len>}
%% \DescribeMacro{\clearfoldoutedge=<len>}
%
%% Foldout geometry.
%%
%% For more info see \nameref{subsec:Foldout page cells} section.
%%
\newlength\clearfoldoutbinding
\setlength\clearfoldoutbinding{8mm}
\newlength\clearfoldoutfold
\setlength\clearfoldoutfold{5mm}
\newlength\clearfoldoutedge
\setlength\clearfoldoutedge{1mm}
%----------------------------------------------------------------------
%%%% Initialization
%%
%% \DescribeMacro{\InitPages}
%
%% Initialize page dimensions.
%%
%% This is not intended for direct use.
%%
% XXX do we need to document this??
% ...is there a usecase for calling this manually?
\newcommand\InitPages{
% layout bools/tests...
\coverlayoutfalse
\hardcoverlayoutfalse
\softcoverlayoutfalse
\endpaperlayoutfalse
\jacketlayoutfalse
\coverlikelayoutfalse
\blocklayoutfalse
\ifdefstring{\layoutmode}{block}{
\blocklayouttrue }{}
\ifdefstring{\layoutmode}{cover}{
\coverlayouttrue
\coverlikelayouttrue }{}
\ifdefstring{\layoutmode}{hardcover}{
\hardcoverlayouttrue
\coverlikelayouttrue }{}
\ifdefstring{\layoutmode}{softcover}{
\softcoverlayouttrue
\coverlikelayouttrue }{}
\ifdefstring{\layoutmode}{jacket}{%
\jacketlayouttrue
\coverlikelayouttrue }{}
\ifdefstring{\layoutmode}{endpaper}{
\endpaperlayouttrue }{}
% pdf layout...
\ifx\photobook@pdfpagelayout\empty
\ifblocklayout
\def\pdfpagelayout{TwoPageRight}
\else
\def\pdfpagelayout{SinglePage}\fi
\else
\def\pdfpagelayout{\photobook@pdfpagelayout}\fi
% items to ignore in different layouts...
\ifcoverlayout\else
\setlength\coverflap{0pt}\fi
\ifjacketlayout\else
\setlength\jacketwrap{0pt}
\setlength\jacketflap{0pt}\fi
% flaps...
\ifdim\jacketflapfront=0pt
\setlength\jacketflapfront{\jacketflap}\fi
\ifdim\jacketflapback=0pt
\setlength\jacketflapback{\jacketflap}\fi
% block size...
\ifdim\blockwidth=0pt
% layout: block...
\setlength\blockwidth{
\ifx\photobook@blockwidth\empty
\dimexpr
\paperwidth
- 2\bleed \relax
\else
\photobook@blockwidth \fi}
\setlength\pageblockwidth{\blockwidth}
% layout: cover...
\ifcoverlayout
\pagestyle{empty}%
\setsepchar{,}%
\readlist*\pagefoldpanels{%
\the\coverflap,
% board thickness is ignored...
\the\dimexpr
\coverboardgrow
+ \pageblockwidth \relax,
\the\spinefold,
\the\spinewidth,
\the\spinefold,
\the\dimexpr
\coverboardgrow
+ \pageblockwidth \relax,
% board thickness is ignored...
\the\coverflap}%
\photobook@setpagefold{out}
\setlength\blockwidth{
\dimexpr
2\blockwidth
+ \spinewidth
+ 2\spinefold
+ 2\coverboardgrow
+ 2\coverflap \relax}\fi
% layout: jacket...
% XXX this seems to be about 6mm off -- what are we missing here???
\ifjacketlayout
\pagestyle{empty}%
\setsepchar{,}%
\readlist*\pagefoldpanels{%
\the\jacketflapback,
\the\jacketwrap,
\the\dimexpr
\coverboardgrow
+ \pageblockwidth \relax,
\the\spinefold,
\the\spinewidth,
\the\spinefold,
\the\dimexpr
\coverboardgrow
+ \pageblockwidth \relax,
\the\jacketwrap,
\the\jacketflapfront}%
\photobook@setpagefold{out}
\setlength\blockwidth{
\dimexpr
2\blockwidth
+ 2\coverboardgrow
+ \spinewidth
+ 2\spinefold
+ 2\jacketwrap
+ \jacketflapfront
+ \jacketflapback \relax}\fi
% layout: endpaper...
\ifendpaperlayout
\pagestyle{empty}%
\readlist*\pagefoldpanels{%
\the\pageblockwidth,
\the\pageblockwidth}%
\photobook@setpagefold{in}
\setlength\blockwidth{2\blockwidth}\fi\fi
\ifdim\blockheight=0pt
% layout: block / endpaper...
\setlength\blockheight{
\ifx\photobook@blockheight\empty
\dimexpr \paperheight - 2\bleed \relax
\else
\photobook@blockheight\fi}
\setlength\pageblockheight{\blockheight}
% layout: cover...
\ifcoverlayout
\setlength\blockheight{
\dimexpr
\blockheight
+ 2\coverboardgrow
+ 2\coverflap
\relax}\fi
% layout: jacket...
\ifjacketlayout
\setlength\blockheight{
\dimexpr
\blockheight
+ 2\coverboardgrow
\relax}\fi\fi
% default image clearance...
\ifdim \clearimage = \maxdimen
\ifx\photobook@clearimage\empty
%\setlength\clearimage{-\bleed}
\setlength\clearimage{10mm}
\else
\setlength\clearimage{\photobook@clearimage}\fi\fi
% page with bleeds...
% NOTE: this is essentially \paperwidth and \paperheight but we do
% not rely on them being defined -- photobook settings take
% priority over \paperwidth and \paperwidth...
\setlength\bleedblockwidth{\dimexpr
2\bleed
+ \blockwidth \relax}
\setlength\bleedblockheight{\dimexpr
2\bleed
+ \blockheight \relax}
% cells...
\global\setlength\cellparentwidth{\blockwidth}
\global\setlength\cellparentheight{\blockheight}
\global\setlength\cellwidth{\cellparentwidth}
\global\setlength\cellheight{\cellparentheight}
% misc...
\nprounddigits{\photobook@roundprintedlengthsto}}
%% \DescribeMacro{\ReInitPages}
%
%% Reset and re-initialize page dimentions.
%%
\newcommand\ReInitPages{%
\setlength\blockwidth{0mm}%
\setlength\blockheight{0mm}%
\edef\pdfpagelayout{}%
%
\InitPages%
\ResetFoldMarks}
%----------------------------------------------------------------------
% Setup...
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
% on-import...
% init/update lengths...
\InitPages
% minimal geometry setup...
\RequirePackage[
% paper size (incl. bleeds)...
paperwidth=\bleedblockwidth, paperheight=\bleedblockheight,
]{geometry}
% colors...
% This prevents \pagecolor from getting drawn over other elements...
\pagecolor{white}
\pagecolor{none}
\color{black}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
% pre-document...
\AtEndPreamble{
% Metadata...
\hypersetup{
pdfinfo={
Title={\@title},
Subject={\@subject},
Author={\@author},
Keywords={\@keywords},
},
pdfpagelayout=\pdfpagelayout,
}
% Geometry...
\InitPages
% no-defaults -- the user is expected to set things up...
\ifphotobook@geometrynodefaults
\geometry{
% paper size (incl. bleeds)...
paperwidth=\bleedblockwidth, paperheight=\bleedblockheight,
bindingoffset=\bindingoffset}
% normal mode...
\else
\geometry{
% paper size (incl. bleeds)...
paperwidth=\bleedblockwidth, paperheight=\bleedblockheight,
bindingoffset=\bindingoffset,
% include header/footer/margin notes in printed area
twoside, includeall, nomarginpar,
ignorehead=false, ignorefoot=false, ignoremp=false,
% center printed area on page
vcentering, hcentering}\fi
\setlength\pagetextwidth{\textwidth}
\setlength\pagetextheight{\textheight}
% PDF boxes...
\pdfboxesset[\bleed]{\bleedblockwidth}{\bleedblockheight}}
%----------------------------------------------------------------------
%%%% Generic commands
%%
%% \DescribeMacro{\keywords\{..\}}
%
%% Set pdf metadata keywords
%%
%% >> \keywords{<keywords>}
%%
\def\@keywords{}
\newcommand\keywords[1]{%
\def\@keywords{#1}}
%% \DescribeMacro{\subject\{..\}}
%
%% Set pdf metadata subject
%%
%% >> \subject{<subject>}
%%
\def\@subject{}
\newcommand\subject[1]{%
\def\@subject{#1}}
%% \DescribeMacro{\mindim\{..\}}
%% \DescribeMacro{\maxdim\{..\}}
%
%% Get min/max dimension.
%
%% >> \mindim{A}{B}
%
%% >> \maxdim{A}{B}
%%
% XXX do we actually need these??
% ...should be simple to replace with calc's:
% 0pt + \minof{..}
% 0pt + \maxof{..}
\newcommand\mindim[2]{
\ifdim \dimexpr #1 \relax < \dimexpr #2 \relax%
\dimexpr #1 \relax%
\else%
\dimexpr #2 \relax\fi}
\newcommand\maxdim[2]{
\ifdim \dimexpr #1 \relax > \dimexpr #2 \relax%
\dimexpr #1 \relax%
\else%
\dimexpr #2 \relax\fi}
%% \DescribeMacro{\emptypage\{..\}}
%
%% Create an empty page.
%
%% >> \emptypage
%% >> \emptypage[<style>]
%
%% |<style>| is the style name as defined via |fancyhdr| (default: |empty|).
%%
\newcommand\emptypage[1][empty]{%
\begin{page}%
\ifthenelse{\equal{#1}{}}{}{%
\thispagestyle{#1}}%
\end{page}}
%% \DescribeMacro{\cleartoleftpage}
%
%% Forces content to left page.
%%
%% This is a companion to |\cleardoublepage|.
%%
\newcommand*{\cleartoleftpage}{%
\clearpage
\if@twoside
\ifodd\c@page
\hbox{}\newpage
\if@twocolumn
\hbox{}\newpage \fi\fi\fi }
%M \DescribeMacro{\ResettableMacro\{..\}}
%
%M Create a resettable command.
%
%M >> \ResettableMacro{<name>}{<code>}
%M >> \ResettableMacro{<name>}[<arg-count>]{<code>}
%M >> \ResettableMacro{<name>}[<arg-count>][<default>]{<code>}
%
%M This is similar to |\newcommand{..}| but will define two commands:
%M
%M >> \<name>{..}
%M
%M >> \reset<name>
%M
%M |\<name>{..}| can be freely redefined or undefined by user.
%M
%M |\reset<name>| will reset |\<name>{..}| to its original state.
%M
% parse args...
\def\ResettableMacro#1{%
\@ifnextchar[{%
\photobook@ResettableMacro@pre{#1}%
}{%
\photobook@ResettableMacro{#1}}}
\def\photobook@ResettableMacro@pre#1[#2]{%
\@ifnextchar[{%
\photobook@ResettableMacro@args@dfl{#1}[#2]%
}{%
\photobook@ResettableMacro@args{#1}[#2]}}
% pre -- main command definition...
\def\photobook@ResettableMacro#1#2{%
\expandafter\newcommand\csname photobook@ResettableMacro@#1\endcsname{#2}%
\photobook@ResettableMacro@tail{#1}}
\def\photobook@ResettableMacro@args#1[#2]#3{%
\expandafter\newcommand\csname photobook@ResettableMacro@#1\endcsname[#2]{#3}%
\photobook@ResettableMacro@tail{#1}}
\def\photobook@ResettableMacro@args@dfl#1[#2][#3]#4{%
\expandafter\newcommand\csname photobook@ResettableMacro@#1\endcsname[#2][#3]{#4}%
\photobook@ResettableMacro@tail{#1}}
% post...
\def\photobook@ResettableMacro@tail#1{%
% \reset<name>
\expandafter\newcommand\csname reset#1\endcsname{%
\expandafter\let\csname #1\expandafter\endcsname\csname photobook@ResettableMacro@#1\endcsname}
% initialize...
\csname reset#1\endcsname}
% XXX EXPERIMENTAL
% >> \resizedpage[<bleed>]{<width>}{<height>}{<code>}
\newenvironment{resizedpages}[3][\bleed]{
\begingroup%
% setup page...
\setlength\bleed{#1}%
\setlength\blockwidth{#2}%
\setlength\blockheight{#3}%
\setlength\pageblockwidth{\blockwidth}%
\setlength\pageblockheight{\blockheight}%
\edef\pdfpagelayout{}%
%
\InitPages%
%
\setlength\paperwidth{\bleedblockwidth}%
\setlength\paperheight{\bleedblockheight}%
%
\pdfboxesset[\bleed]{\bleedblockwidth}{\bleedblockheight}%
%
% NOTE: this prevents some issues with macros racing to place
% stuff at ship-out (possibly)...
% ...also see cell env...
% XXX needs more digging...
% XXX do this at beginshipout/beginpage... (???)
%\null%
%\hbox{}%
}{%
\endgroup%
% reset...
\pdfboxesset[\bleed]{\bleedblockwidth}{\bleedblockheight}}
%----------------------------------------------------------------------
%%%% Environments and Cells
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Generic
%% \DescribeEnv{page}
%
%% Page environment.
%%
%% This is mainly designed to wrap other cell environment described later.
%%
%% Note that this may span more than one page if there is enough stuff
%% packed in.
%%
\newenvironment{page}{%
\null%
\ignorespaces%
}{%
\clearpage}
%% \DescribeEnv{leftpage}
%
%% \EXPERIMENTAL
%%
% XXX not sure about this...
\newenvironment{leftpage}{%
\begin{page}%
\cleartoleftpage%
}{%
\end{page}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Cells
% meta helpers...
%M \DescribeMacro{\CellContentOptions\{..\}}
%
%M \EXPERIMENTAL
%M
%M Define standard cell options.
%M
% XXX figure out how to align and pad without messing with geometry...
\newcommand\CellContentOptions[1]{%
%% align...
%\expandafter\def\csname photobook@#1@align\endcsname{flushleft}%
%\define@key{#1@args}{align}{%
% \expandafter\edef\csname photobook@#1@align\endcsname{##1}}%
% valign...
\expandafter\def\csname photobook@#1@valign\endcsname{t}%
\define@key{#1@args}{valign}{%
\expandafter\edef\csname photobook@#1@valign\endcsname{##1}}%
%% margin...
%\expandafter\def\csname photobook@#1@margin\endcsname{0pt}%
%\define@key{#1@args}{margin}{%
% \expandafter\edef\csname photobook@#1@margin\endcsname{##1}}%
%% padding...
%\expandafter\def\csname photobook@#1@padding\endcsname{0pt}%
%\define@key{#1@args}{padding}{%
% \expandafter\edef\csname photobook@#1@padding\endcsname{##1}}%
}
%M \DescribeEnv{CellContent}
%M \DescribeEnv{CellContent*}
%
%M \EXPERIMENTAL
%M
%M Standard cell content wrapper, used by |inlinecell|.
%
%M >> \begin{CellContent}[<parent-align>]{<name>} ... \end{CellContent}
%M >> \begin{CellContent*}[<parent-align>]{<name>}{<width>}{<height>} ... \end{CellContent}
%
%M The star version requires width/height to be manually passed while the
%M non-star version will get the values from |\cellwidth| and |\cellheight|
%M respectively.
%
% XXX TEST params...
\newenvironment{CellContent}[2][t]{%
\begin{CellContent*}[#1]{#2}{\cellwidth}{\cellheight}%
}{%
\end{CellContent*}}
\newenvironment{CellContent*}[4][t]{%
\begin{adjustbox}{
minipage=[#1][#4][\csname photobook@#2@valign\endcsname]{#3},
valign=#1}%
\ignorespaces%
}{%
% NOTE: prevent empty "minipage" from collapsing...
\hspace{\fill}%
\end{adjustbox}}
%M \DescribeEnv{CellContent}
%M \DescribeEnv{CellContent*}
%
%M \EXPERIMENTAL
%M
%M Like |CellContent| / |CellContent*| but will use |minipage| as the wrapper.
%
%M >> \begin{MinipageCellContent}[<parent-align>]{<name>} ... \end{MinipageCellContent}
%M >> \begin{MinipageCellContent*}[<parent-align>]{<name>}{<width>}{<height>} ... \end{MinipageCellContent}
%
% XXX TEST...
% XXX doc...
\newenvironment{MinipageCellContent}[2][t]{%
\begin{MinipageCellContent*}[#1]{#2}{\cellwidth}{\cellheight}%
}{%
\end{MinipageCellContent*}}
\newenvironment{MinipageCellContent*}[4][t]{%
\begin{minipage}[#1][#4][\csname photobook@#2@valign\endcsname]{#3}%
}{%
\end{minipage}}
%% A cell environment is a box of specified size.
%%
%% Cells can be both placed inline relative to other content or in an
%% absolute location.
%%
%% Note that absolute cells are placed relative to the page and currently
%% can not be placed relative to other absolute cells (this might change
%% in the future).
%%
%% \DescribeMacro{\cellwidth=<len>}
%% \DescribeMacro{\cellheight=<len>}
%% \DescribeMacro{\cellparentwidth=<len>}
%% \DescribeMacro{\cellparentheight=<len>}
%% \DescribeMacro{\celloffsettop=<len>}
%% \DescribeMacro{\celloffsetleft=<len>}
%% \DescribeMacro{\clearance=<len>}
%%
%% A cell defines a set of contextual lengths:
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% <--> celloffsetleft
%% . <--------------> cellwidth
%% <----------------------> cellparentwidth
%% . . . .
%% +----------------------+ . . . . . . .
%% | . . | ^ ^ celloffsettop
%% | . . | | |
%% | +--------------+ . | . . | . . . v
%% | | | | | ^
%% | | | | | | cellheight
%% | | cell | | | |
%% | | | | | |
%% | | | | | |
%% | +--------------+ . | . . | . v
%% | | |
%% | | | cellparentheight
%% +----------------------+ . . v
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% For absolutely positioned cells these define the cell offset from
%% parent.
%%
%% The bare page can be reasonably treated as a cell.
%%
%% Initally, outside of any cells |\cellwidth|, |\cellparentwidth| and
%% |\cellheight|, |\cellparentheight| are equal to |\paperwidth| and
%% |\paperheight| respectively, and |\celloffsettop| and |\celloffsetleft|
%% are set to |0pt|.
%%
%% Changing these is not recommended, it likely will not affect the
%% current cell but can mess up nested cells.
%%
%% \DescribeEnv{inlinecell}
%% \DescribeEnv{inlinecell*}
%
%% Create a basic inline cell.
%
%% >> \begin{inlinecell}{<width>}{<height>} ... \end{inlinecell}
%% >> \begin{inlinecell}[<valign>]{<width>}{<height>} ... \end{inlinecell}
%
%% This will clip oversized content.
%%
%% |inlinecell*| is like |inlinecell| but will not clip.
%
%% >> \begin{inlinecell*}{<width>}{<height>} ... \end{inlinecell*}
%% >> \begin{inlinecell*}[<valign>]{<width>}{<height>} ... \end{inlinecell*}
%
%% |<valign>| can be one of |t| (default) for top, |c| for center or |b| for bottom.
%%
%% These are just like |minipage| but provide cell mechanics.
%%
% XXX EXPERIMENTAL
\CellContentOptions{inlinecell}
\def\photobook@inlinecell@parentvalign{t}
\define@boolkey{inlinecell@args}{t}[true]{%
\def\photobook@inlinecell@parentvalign{t}}
\define@boolkey{inlinecell@args}{c}[true]{%
\def\photobook@inlinecell@parentvalign{c}}
\define@boolkey{inlinecell@args}{b}[true]{%
\def\photobook@inlinecell@parentvalign{b}}
\newenvironment{inlinecell*}[3][]{%
\begingroup%
\setkeys{inlinecell@args}{
t,
#1}%
%
% get args by value...
\edef\photobook@protect@w{\the\dimexpr #2 \relax}%
\edef\photobook@protect@h{\the\dimexpr #3 \relax}%
%
\setlength\cellparentwidth{\cellwidth}%
\setlength\cellparentheight{\cellheight}%
\setlength\cellwidth{\photobook@protect@w}%
\setlength\cellheight{\photobook@protect@h}%
\setlength\celloffsettop{0pt}%
\setlength\celloffsetleft{0pt}%
%
\begin{CellContent}[\photobook@inlinecell@parentvalign]{inlinecell}%
}{%
\end{CellContent}%
\endgroup}
\newenvironment{inlinecell}[3][t]{%
\begin{inlinecell*}[#1]{#2}{#3}%
\begin{cliptocell}%
}{%
\end{cliptocell}%
\end{inlinecell*}}
% XXX EXPERIMENTAL
%% \DescribeEnv{minipagecell}
%% \DescribeEnv{minipagecell*}
%
%% \EXPERIMENTAL
%%
\CellContentOptions{minipagecell}
\def\photobook@minipagecell@parentvalign{t}
\define@boolkey{minipagecell@args}{t}[true]{%
\def\photobook@minipagecell@parentvalign{t}}
\define@boolkey{minipagecell@args}{c}[true]{%
\def\photobook@minipagecell@parentvalign{c}}
\define@boolkey{minipagecell@args}{b}[true]{%
\def\photobook@minipagecell@parentvalign{b}}
\newenvironment{minipagecell*}[3][]{%
\begingroup%
\setkeys{minipagecell@args}{
t,
#1}%
% get args by value...
\edef\photobook@protect@w{\the\dimexpr #2 \relax}%
\edef\photobook@protect@h{\the\dimexpr #3 \relax}%
%
\setlength\cellparentwidth{\cellwidth}%
\setlength\cellparentheight{\cellheight}%
\setlength\cellwidth{\photobook@protect@w}%
\setlength\cellheight{\photobook@protect@h}%
\setlength\celloffsettop{0pt}%
\setlength\celloffsetleft{0pt}%
\setlength\clearance{0pt}%
%
\begin{MinipageCellContent}[\photobook@minipagecell@parentvalign]{minipagecell}%
}{%
\end{MinipageCellContent}%
\endgroup}
\newenvironment{minipagecell}[3][t]{%
\begin{minipagecell*}[#1]{#2}{#3}%
\begin{cliptocell}%
}{%
\end{cliptocell}%
\end{minipagecell*}}
% XXX EXPERIMENTAL
% XXX revise docs...
%% \DescribeEnv{zinlinecell}
%% \DescribeEnv{zinlinecell*}
%
%% \EXPERIMENTAL
%%
%% Like |inlinecell| / |inlinecell*| but will take up zero space and
%% sized to |\cellwidth| x |\cellheight|.
%%
%% >> \begin{zinlinecell} ... \end{zinlinecell}
%% >> \begin{zinlinecell}[<valign>] ... \end{zinlinecell}
%%
% XXX need to get rid of the raisebox here...
\NewEnviron{zinlinecell*}[1][]{%
\smash{\makebox[0pt][l]{%
% XXX HACK: RAISEBOX -- feels hackish...
\raisebox{0pt - \totalheightof{O}}{%
\begin{inlinecell*}[#1]{\cellwidth}{\cellheight}%
\BODY%
\end{inlinecell*}}}}}
\NewEnviron{zinlinecell}[1][]{%
\smash{\makebox[0pt][l]{%
% XXX HACK: RAISEBOX -- feels hackish...
\raisebox{0pt - \totalheightof{O}}{%
\begin{inlinecell}[#1]{\cellwidth}{\cellheight}%
\BODY%
\end{inlinecell}}}}}
%% \DescribeEnv{cell}
%% \DescribeEnv{cell*}
%
%% Create a basic absolutely positioned cell.
%
%% >> \begin{cell}{<left>, <top>}{<width>}{<height>} ... \end{cell}
%
%% Oversized content will be clipped.
%%
%% |cell*| is just like |cell| but will not clip its content.
%
%% >> \begin{cell*}{<left>, <top>}{<width>}{<height>} ... \end{cell*}
%%
% XXX SYNTAX: place the second arg in braces...
% \begin{cell*}(<left>, <top>){<width>}{<height>}
\newenvironment{cell*}[3]{%
\begingroup%
\setsepchar{,}%
\readlist*\photobook@cell@offset{#1}%
%
% NOTE: if there is no \null before textblock then it can reset the
% non-standard page boxes...
% ...not sure yet if this is an issue with how/when foldout env
% updates the boxes or with textblock internals, needs
% investigating...
% XXX report this as a bug if issue is in textblock...
% XXX another place where this is relevant is in the resizedpages
% env...
\null%
\begin{textblock*}{#2}(#1)%
\begin{inlinecell*}{#2}{#3}%
\setlength\celloffsettop{\photobook@cell@offset[1]}%
\setlength\celloffsetleft{\photobook@cell@offset[2]}%
\ignorespaces%
}{%
\end{inlinecell*}%
\end{textblock*}%
\endgroup%
\ignorespaces}
\newenvironment{cell}[3]{%
\begin{cell*}{#1}{#2}{#3}%
\begin{cliptocell}%
\ignorespaces%
}{%
\end{cliptocell}%
\end{cell*}%
\ignorespaces}
% XXX EXPERIMENTAL
%% \DescribeEnv{adjustcell}
%% \DescribeEnv{adjustcell*}
%
%% \EXPERIMENTAL
%%
\newenvironment{adjustcell*}[4][t]{%
\begin{adjustbox}{#2}%
\vspace{0pt}%
\begin{minipagecell*}[#1]{#3}{#4}%
}{%
\end{minipagecell*}%
\end{adjustbox}}
\newenvironment{adjustcell}[4][t]{%
\begin{adjustbox}{#2}%
\vspace{0pt}%
\begin{minipagecell}[#1]{#3}{#4}%
}{%
\end{minipagecell}%
\end{adjustbox}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Save cells
%% \DescribeMacro{\savecell\{..\}}
%% \DescribeMacro{\gsavecell\{..\}}
%
%% Create a saved cell.
%
%% >> \savecell{<name>}{<width>}{<height>}{ .. }
%
%% This is similar to |\newsavebox{..}| and |\sbox{..}| but adds
%% cell functionality.
%%
%% |\gsavecell{..}| is the same as |\savecell{..}| but greates a global
%% cell.
%%
% XXX can/should we make this an env???
% XXX should this be split into \newsavecell{..} and \scell{..} ???
% XXX can we use root cells inside this???
% ...i.e. things using textbox*...
\newcommand\savecell[5][]{%
% only define a savebox once...
\@ifundefined{#2}{%
\expandafter\newsavebox\csname #2\endcsname}{}
\expandafter\sbox\csname #2\endcsname{%
\begin{inlinecell*}[#1]{#3}{#4}%
#5%
\end{inlinecell*}}%
\ignorespaces}
\newcommand\gsavecell[5][]{%
% only define a savebox once...
\@ifundefined{#2}{%
\expandafter\newsavebox\csname #2\endcsname}{}
\global\expandafter\sbox\csname #2\endcsname{%
\begin{inlinecell*}[#1]{#3}{#4}%
#5%
\end{inlinecell*}}%
\ignorespaces}
%% \DescribeMacro{\usecell\{..\}}
%% \DescribeMacro{\usecell*\{..\}}
%
%% Use part of a saved cell.
%%
%% >> \usecell{<name>}(<top>, <left>){<width>}{<height>}
%%
%% This will clip the content to cell.
%%
%% |\usecell*{..}| is similar to |\usecell{..}| but will not clip the
%% cell content.
%%
%% >> \usecell*{<name>}(<top>, <left>){<width>}{<height>}
%%
%% These are similar to |\usebox{..}|.
%%
\def\usecell{\@ifstar{%
\photobook@usecell%
}{%
\photobook@usecell@star}}
% cell content...
% NOTE: this is not intended for direct use -- depends closure/context...
\def\photobook@usecell@placecell#1(#2){%
\setsepchar{,}%
\readlist*\photobook@usecell@offset{#2}%
% XXX how we align things feels a bit odd...
\vspace{-\dimexpr \photobook@usecell@offset[1] \relax}%
\adjustbox{margin={-\dimexpr \photobook@usecell@offset[2] \relax} 0pt 0pt 0pt}{%
\expandafter\usebox\csname #1\endcsname}}
% XXX add option to rotate saved cell...
\def\photobook@usecell@star#1(#2)#3#4{
\begin{inlinecell}{#3}{#4}%
\photobook@usecell@placecell{#1}(#2)%
\end{inlinecell}}
% XXX add option to rotate saved cell...
\def\photobook@usecell#1(#2)#3#4{
\begin{inlinecell*}{#3}{#4}%
\photobook@usecell@placecell{#1}(#2)%
\end{inlinecell*}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Cell macros
%
%% Cell macros require a cell environment to function correctly.
%%
%% \DescribeEnv{topdown}
%% \DescribeEnv{bottomup}
%
%% Rotate cell content vertically, orienting it top-down or bottom-up.
%
%% >> \begin{topdown} ... \end{topdown}
%% >> \begin{bottomup} ... \end{bottomup}
%%
\newenvironment{topdown}[1][t]{%
\begin{flushright}%
\begin{turn}{270}%
\begin{inlinecell*}[#1]{\cellheight}{\cellwidth}%
}{%
\end{inlinecell*}%
\end{turn}%
\end{flushright}}
\newenvironment{bottomup}[1][t]{%
\begin{turn}{90}%
\begin{inlinecell*}[#1]{\cellheight}{\cellwidth}%
}{%
\end{inlinecell*}%
\end{turn}}
%% \DescribeEnv{cliptocell}
%
%% Clip content to parent cell.
%%
\newenvironment{cliptocell}{%
\begin{clipbox*}{0cm {\height - \cellheight} {\cellwidth} {\height}}%
\begin{minipage}[t][\cellheight][t]{\cellwidth}%
\ignorespaces%
}{%
\end{minipage}%
\end{clipbox*}}
%% \DescribeMacro{\imagecell\{..\}}
%
%% Place image in cell.
%
%% >> \imagecell{<caption-cell>}{<image>}
%% >> \imagecell[<key>=<value>, ..]{<caption-cell>}{<image>}
%%
%% >> \imagecell[fit]{}{<image>}
%% >> \imagecell[fill]{}{<image>}
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% fit (default) fill
%% +-----------------+ . . . +-----------------+ . . .
%% | | . . | | . .
%% +-----------------+ . | | .
%% | . . | . | . . | .
%% | . . | . | . . | .
%% | image | . | image | .
%% | . . | . | . . | .
%% | . . | . | . . | .
%% +-----------------+ . | | .
%% | | . . | | . .
%% +-----------------+ . . . +-----------------+ . . .
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Centering. The image will be centered by default.
%%
%% >> \imagecell{}{<image>}
%% >> \imagecell[center]{}{<image>}
%%
%% Vertical alignment
%%
%% >> \imagecell[top]{}{<image>}
%% >> \imagecell[bottom]{}{<image>}
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% top center (default) bottom
%% +-----------------+ +-----------------+ +-----------------+
%% | . . | | | | |
%% | . . | +-----------------+ | |
%% | image | | . . | | |
%% | . . | | . . | +-----------------+
%% | . . | | image | | . . |
%% +-----------------+ | . . | | . . |
%% | | | . . | | image |
%% | | +-----------------+ | . . |
%% | | | | | . . |
%% +-----------------+ +-----------------+ +-----------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Horizontal alignment
%%
%% >> \imagecell[left]{}{<image>}
%% >> \imagecell[right]{}{<image>}
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% left center (default) right
%% +-------------+---+ +-+-------------+-+ +---+-------------+
%% | . . | | | | . . | | | | . . |
%% | . . | | | | . . | | | | . . |
%% | . . | | | | . . | | | | . . |
%% | . . | | | | . . | | | | . . |
%% | image | | | | image | | | | image |
%% | . . | | | | . . | | | | . . |
%% | . . | | | | . . | | | | . . |
%% | . . | | | | . . | | | | . . |
%% | . . | | | | . . | | | | . . |
%% +-------------+---+ +-+-------------+-+ +---+-------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Horizontal and vertical alignment can be combined to control alignment
%% of both vertical and horizontal images at the same time.
%%
%% Image |clearance|. This sets the amount of clearance around an image
%% (default: |0pt|).
%%
%% >> \imagecell[clearance=-4mm]{}{<image>}
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% clearance > 0pt clearance = 0pt clearance < 0pt
%% (default)
%% +--------v--------+ +-----------------+ +--------^--------+
%% | | | | | |
%% |+---------------+| +-----------------+ ..+-----------------+..
%% || . . || | . . | . |. .| .
%% || . . || | . . | . | . . | .
%% |> image <| | image | < | image | >
%% || . . || | . . | . | . . | .
%% || . . || | . . | . |. .| .
%% |+---------------+| +-----------------+ ..+-----------------+..
%% | | | | | |
%% +--------^--------+ +-----------------+ +--------v--------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Note that if |clearance| is less than 0, the image will take up more
%% space than the containing cell, |\imagecell{..}| will not clip
%% its content and the whole image surface will be shown. If clipping is
%% needed then use |clipcell| environment as a container.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% +-----------------+ - - caption cell size
%% . . .
%% +-----------------+ .
%% | | .
%% ..+-----------------+.. . +
%% . |.caption cell .| . |
%% . | . . | . |
%% . | . | . |
%% . | . . | . |
%% . |. .| . |
%% ..+-----------------+.. . +
%% | |
%% +-----------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% |<caption-cell>| occupies the same space as the image clipped by the
%% containing cell and provides all the cell functionality.
%%
%% If |captionclearparent| is set, the |<caption-cell>| will fit into an
%% intersection between the image area and the parent cell padded by
%% |captionclearparent|.
%%
%% This will write image path, page and size to |\jobname|.image-list,
%% this is useful for final image pre-press.
%%
%% To disable image list set:
%
%% >> \writeimagelistfalse
%%
% XXX do we need captionclearparent to be directional (a-la margin in adjustbox)???
% XXX might be a good idea to split this into two parts:
% - \aligncell{..}
% - \imagecell{caption}{image}
% -> size image
% -> \aligncell{
% image
% caption}
% XXX document scale/offsettop/offsetleft...
% helpers...
% image size logging...
\newif\ifwriteimagelist
\writeimagelisttrue
\newwrite\photobook@imagelist
\def\photobook@logimagesize@setup{%
\immediate\openout\photobook@imagelist=\jobname.image-list%
\AfterEndDocument{%
\immediate\closeout\photobook@imagelist}%
% setup only once per job...
\global\def\photobook@logimagesize@setup{}}
% >> \photobook@logimagesize{<path>}{<page>}{<imagebox>}
% XXX for some reason can't use \lenprint[mm]{..} in \write{..}...
\newcommand\photobook@logimagesize[3]{%
\ifwriteimagelist%
% first setup...
\photobook@logimagesize@setup%
% write...
\immediate\write\photobook@imagelist{%
#1: p#2: \the\wd#3\space x \the\ht#3}\fi}%
% NOTE: these are macros and not lengths as we need to "resolve" these
% as late as possible, i.e. after all the arguments have been
% processed.
\def\photobook@imagecell@top{0pt}
\def\photobook@imagecell@left{0pt}
\def\photobook@imagecell@captiontop{0pt}
\def\photobook@imagecell@captionleft{0pt}
\newlength\photobook@imagecell@clearance
\setlength\photobook@imagecell@clearance{0pt}
% NOTE: these feel like a hack...
\newlength\photobook@imagecell@imgratio
\newlength\photobook@imagecell@cellratio
% fit/fill...
\define@boolkey{imagecell@args}{fit}[true]{%
\KV@imagecell@args@fillfalse}
\define@boolkey{imagecell@args}{fill}[true]{%
\KV@imagecell@args@fitfalse}
% center...
\define@boolkey{imagecell@args}{center}[true]{%
\def\photobook@imagecell@top{\dimexpr
+0.5\cellheight
-0.5\ht\photobook@imagebox \relax}%
\def\photobook@imagecell@left{\dimexpr
+0.5\cellwidth
-0.5\wd\photobook@imagebox \relax}}%
% left/right...
% shortdands...
\newcommand\photobook@imagecell@LEFT{%
\def\photobook@imagecell@left{\dimexpr%
+\photobook@imagecell@clearance \relax}%
\def\photobook@imagecell@captionleft{
% XXX not sure why this branch is needed...
\ifKV@imagecell@args@fit
0pt
\else%
\dimexpr%
+\cellwidth
-\photobook@imagecell@clearance
-\wd\photobook@imagebox \relax\fi}}%
\newcommand\photobook@imagecell@RIGHT{%
\def\photobook@imagecell@left{\dimexpr
+\cellwidth
-\photobook@imagecell@clearance
-\wd\photobook@imagebox \relax}
% XXX not sure why 0.5 but it seems to work...
\def\photobook@imagecell@captionleft{%
-0.5\photobook@imagecell@left}}%
% args...
\define@boolkey{imagecell@args}{left}[true]{%
\photobook@imagecell@LEFT}
\define@boolkey{imagecell@args}{right}[true]{%
\photobook@imagecell@RIGHT}
% inside/outside...
\define@boolkey{imagecell@args}{inside}[true]{%
\ifthenelse{\isodd{\thepage}}{%
\photobook@imagecell@LEFT%
}{%
\photobook@imagecell@RIGHT}}%
\define@boolkey{imagecell@args}{outside}[true]{%
\ifthenelse{\isodd{\thepage}}{%
\photobook@imagecell@RIGHT%
}{%
\photobook@imagecell@LEFT}}%
% top/bottom...
\define@boolkey{imagecell@args}{top}[true]{%
\def\photobook@imagecell@top{%
\photobook@imagecell@clearance}%
\def\photobook@imagecell@captiontop{%
-\dimexpr
+\cellheight
-\ht\photobook@imagebox \relax}}%
\define@boolkey{imagecell@args}{bottom}[true]{%
\def\photobook@imagecell@top{%
\dimexpr
+\cellheight
-\photobook@imagecell@clearance
-\ht\photobook@imagebox \relax}%
\def\photobook@imagecell@captiontop{%
\dimexpr
\photobook@imagecell@top
+\photobook@imagecell@clearance \relax}}%
% clearance=<len>...
\define@key{imagecell@args}{clearance}{%
\setlength\photobook@imagecell@clearance{#1}}%
% offsettop=<len> / offsetleft=<len>...
% XXX DOC!!!
\newlength\photobook@imagecell@offsettop%
\setlength\photobook@imagecell@offsettop{0pt}%
\define@key{imagecell@args}{offsettop}[0pt]{%
\setlength\photobook@imagecell@offsettop{#1}}%
\newlength\photobook@imagecell@offsetleft%
\setlength\photobook@imagecell@offsetleft{0pt}%
\define@key{imagecell@args}{offsetleft}[0pt]{%
\setlength\photobook@imagecell@offsetleft{#1}}%
% scale=<num>...
\edef\photobook@imagecell@scale{1}%
\define@key{imagecell@args}{scale}[1]{%
\edef\photobook@imagecell@scale{#1}}%
% captionalign=t|c|b...
\def\photobook@imagecell@captionalign{t}
\define@choicekey{imagecell@args}{captionalign}{t,c,b}[t]{%
\def\photobook@imagecell@captionalign{#1}}
% captionclearparent=<len>...
% XXX DOC!!!
\newif\ifphotobook@imagecell@captionclearparent
\newlength\photobook@imagecell@captionclearparent
\define@key{imagecell@args}{captionclearparent}[0pt]{%
\setlength\photobook@imagecell@captionclearparent{#1}%
\photobook@imagecell@captionclearparenttrue}
% XXX can we make this an env???
\newcommand\imagecell[3][]{%
\begingroup%
% args...
\setkeys{imagecell@args}{%
fit,
center,
clearance=0pt,
#1}%
% preload image...
% fit...
\ifKV@imagecell@args@fit%
\sbox{\photobook@imagebox}{%
\includegraphics[%
keepaspectratio,
width=\photobook@imagecell@scale\dimexpr
\cellwidth
- ((\photobook@imagecell@clearance) * 2) \relax,
height=\photobook@imagecell@scale\dimexpr
\cellheight
- ((\photobook@imagecell@clearance) * 2) \relax]{#3}}%
% fill...
\else\ifKV@imagecell@args@fill%
% preload image to get its proportions...
\sbox{\photobook@imagebox}{\includegraphics{#3}}%
% constrain minimal dimension of image...
% NOTE: here we calculate image/cell eccentricity to decide
% to fit to width or heigh of cell...
% NOTE: did I say that I "love" how LaTeX does basic math??
\setlength\photobook@imagecell@imgratio{%
1pt * \ratio{\wd\photobook@imagebox}{\ht\photobook@imagebox}}%
\setlength\photobook@imagecell@cellratio{%
1pt * \ratio{\cellwidth}{\cellheight}}%
\ifdim \photobook@imagecell@imgratio < \photobook@imagecell@cellratio%
\sbox{\photobook@imagebox}{%
\includegraphics[%
keepaspectratio,
width=\photobook@imagecell@scale\dimexpr
+ \cellwidth
- ((\photobook@imagecell@clearance) * 2) \relax]{#3}}%
\else%
\sbox{\photobook@imagebox}{%
\includegraphics[%
keepaspectratio,
height=\photobook@imagecell@scale\dimexpr
+ \cellheight
- ((\photobook@imagecell@clearance) * 2) \relax]{#3}}%
\fi\fi\fi%
%
\setlength\celloffsetleft{%
\dimexpr
\photobook@imagecell@offsetleft
+ \photobook@imagecell@left \relax}%
\setlength\celloffsettop{%
\dimexpr
\photobook@imagecell@offsettop
+ \photobook@imagecell@top \relax}%
%
%
% place image box...
% XXX for some odd reason without this the alignment completely breaks...
\vspace{0pt}%
\smash{\makebox[0pt][l]{%
\adjustbox{%
margin={\celloffsetleft} 0pt 0pt {\celloffsettop},
valign=T}{%
\photobook@logimagesize{#3}{\thepage}{\photobook@imagebox}%
\usebox\photobook@imagebox}}}%
%
%
% prepare for caption cell...
\setlength\cellparentwidth{\cellwidth}%
\setlength\cellparentheight{\cellheight}%
\setlength\cellwidth{%
\mindim{
\wd\photobook@imagebox
+ \mindim{\celloffsetleft}{0pt}
}{
\cellwidth}}%
\setlength\cellheight{%
\mindim{
\ht\photobook@imagebox
+ \mindim{\celloffsettop}{0pt}
}{
\cellheight}}%
\setlength\celloffsetleft{%
\maxdim{\celloffsetleft}{0pt}}%
\setlength\celloffsettop{%
\maxdim{\celloffsettop}{0pt}}%
\setlength\clearance{\photobook@imagecell@clearance}%
% clear parent...
% XXX might be a good idea to put this into a special reusable cell...
\ifphotobook@imagecell@captionclearparent%
% trim vertical...
% XXX this seems overcomplicated...
\setlength\cellheight{%
\mindim{
\cellheight
% trim from both sides....
}{\mindim{
\cellparentheight
- 2\photobook@imagecell@captionclearparent
% trim from bottom...
}{\mindim{
\cellheight
+ \celloffsettop
- \photobook@imagecell@captionclearparent
% trim from top...
}{
\cellparentheight
- \photobook@imagecell@captionclearparent
- \celloffsettop}}}}%
% offset top...
\setlength\celloffsettop{
\maxdim{
\celloffsettop
+ (\photobook@imagecell@captionclearparent - \celloffsettop)
}{
\celloffsettop}}%
% trim horizontal...
% XXX this seems overcomplicated...
\setlength\cellwidth{%
\mindim{
\cellwidth
% trim from both sides....
}{\mindim{
\cellparentwidth
- 2\photobook@imagecell@captionclearparent
% trim from right...
}{\mindim{
\cellwidth
+ \celloffsetleft
- \photobook@imagecell@captionclearparent
% trim from left...
}{
\cellparentwidth
- \photobook@imagecell@captionclearparent
- \celloffsetleft}}}}%
% offset left...
\setlength\celloffsetleft{
\maxdim{
\celloffsetleft
+ (\photobook@imagecell@captionclearparent - \celloffsetleft)
}{
\celloffsetleft}}\fi%
%
%
% place caption box...
\smash{\makebox[0pt][l]{%
\adjustbox{%
%cfbox=gray 0.5pt 0pt 0pt,
margin={\celloffsetleft} 0pt 0pt {\celloffsettop},
minipage=[b][\cellheight][\photobook@imagecell@captionalign]{\cellwidth},
valign=T}{%
\ignorespaces%
#2}}}%
\endgroup}
%% \DescribeMacro{\captioncell\{..\}}
%
%% Caption cell
%%
%% Placement:
%
%% >> \captioncell[<position>]{<caption>}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% over
%% +-----------------+
%% | top |
%% | |
%% | |
%% | |
%% | center |
%% | |
%% | |
%% | |
%% | bottom |
%% +-----------------+
%% under
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Default:
%% >> \captioncell{<caption>}
%% >> \captioncell[top]{<caption>}
%%
%% >> \captioncell[center]{<caption>}
%% >> \captioncell[bottom]{<caption>}
%%
%% >> \captioncell[over]{<caption>}
%% >> \captioncell[under]{<caption>}
%%
%% Horizontal alignment
%
%% >> \captioncell[align=<mode>]{<caption>}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% +-----------------+ +-----------------+ +-----------------+
%% |flushleft | | center | | flushright|
%% | | | | | |
%% | | | | | |
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Default:
%% >> \captioncell{<caption>}
%% >> \captioncell[align=flushleft]{<caption>}
%%
%% >> \captioncell[align=center]{<caption>}
%% >> \captioncell[align=flushright]{<caption>}
%%
%% Note that a caption cell does not take up any space in the parent cell
%% so multiple captions can be used in combination with other elements.
%%
%% Note that caption cells currently do not play well with other content
%% in the same cell that takes up space, e.g. text, pictures, ...etc.
%% Captions are mainly suited to play well with image cells.
%%
% over / top / center / bottom / under...
\define@boolkey{captioncell@args}{over}[true]{%
\def\photobook@captioncell@format##1{%
\photobook@captioncell@formatalign[-\cellheight]{b}{##1}}}
\define@boolkey{captioncell@args}{top}[true]{%
\def\photobook@captioncell@format##1{%
\photobook@captioncell@formatalign{t}{##1}}}
\define@boolkey{captioncell@args}{center}[true]{%
\def\photobook@captioncell@format##1{%
\smash{\makebox[0pt][l]{%
\begin{minipage}[t][\cellheight][c]{\cellwidth}%
\begin{\photobook@captioncell@align}%
\ignorespaces%
##1%
\end{\photobook@captioncell@align}%
\end{minipage}}}}}
\define@boolkey{captioncell@args}{bottom}[true]{%
\def\photobook@captioncell@format##1{%
\photobook@captioncell@formatalign{b}{##1}}}
\define@boolkey{captioncell@args}{under}[true]{%
\def\photobook@captioncell@format##1{%
\photobook@captioncell@formatalign[\cellheight]{t}{##1}}}
% align=<len>...
\def\photobook@captioncell@align{}
% XXX for some reason \define@choicekey{..} does not expand macros...
%\define@choicekey{captioncell@args}{align}{flushleft,center,flushright}{%
\define@key{captioncell@args}{align}{%
\def\photobook@captioncell@align{#1}}
% margin=<len>...
\def\photobook@captioncell@margin{0pt}
\define@key{captioncell@args}{margin}{%
\def\photobook@captioncell@margin{#1}}
% helpers...
% XXX set minipage height to available cell height (???)
\newcommand\photobook@captioncell@formatalign[3][0pt]{%
\smash{\makebox[0pt][l]{%
\begin{minipage}[t][\cellheight][t]{\cellwidth}%
% XXX for some reason without this things get misaligned...
\vspace{#1}%
% XXX HACK: for some magical reason setting the above minipage to 'b'
% will make \vspace{..} above break...
% ...adding another nested minipage seems to fix the issue...
\begin{minipage}[t][\cellheight][#2]{\cellwidth}%
\begin{\photobook@captioncell@align}%
\ignorespaces%
% XXX BUG: for some reason the text here will not line-break...
% putting it in a minipage here does nothing while the same
% minipage on the lient size fixes the issue...
#3%
\end{\photobook@captioncell@align}%
\end{minipage}
\end{minipage}}}}
% format...
\def\photobook@captioncell@format#1{%
\photobook@captioncell@formatalign{t}{#1}}
\newcommand\captioncell[2][]{%
\setkeys{captioncell@args}{
top,
align=flushright,
margin=1pt,
#1}%
\photobook@captioncell@format{%
\adjustbox{margin=\photobook@captioncell@margin}{#2}}%
\ignorespaces}
%% \DescribeMacro{\vcaptioncell\{..\}}
%
%% Vertical caption cell
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% (topdown) (bottomup)
%% +-----------------+ +-----------------+
%% b | l c r | a | |
%% e | e e i | f | |
%% f | f n g | t | |
%% o | t t h | e e | r |
%% r | e t | r r | e t | r
%% e | r | o | t t h | e
%% | | f | f n g | t
%% | | e | e e i | f
%% | | b | l c r | a
%% +-----------------+ +-----------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% See samples for better illustration.
%%
% bottomup / topdown...
\def\photobook@vcaptioncell@orientation{bottomup}
\define@boolkey{vcaptioncell@args}{bottomup}[true]{%
\KV@vcaptioncell@args@topdownfalse%
\def\photobook@vcaptioncell@orientation{bottomup}}
\define@boolkey{vcaptioncell@args}{topdown}[true]{%
\KV@vcaptioncell@args@bottomupfalse%
\def\photobook@vcaptioncell@orientation{topdown}}
% before / left / center / right / after...
\def\photobook@vcaptioncell@position{top}
\define@boolkey{vcaptioncell@args}{before}[true]{%
\def\photobook@vcaptioncell@position{%
\ifKV@vcaptioncell@args@bottomup%
over%
\else%
under\fi}}
\define@boolkey{vcaptioncell@args}{left}[true]{%
\def\photobook@vcaptioncell@position{%
\ifKV@vcaptioncell@args@bottomup%
top%
\else%
bottom\fi}}
\define@boolkey{vcaptioncell@args}{center}[true]{%
\def\photobook@vcaptioncell@position{center}}
\define@boolkey{vcaptioncell@args}{right}[true]{%
\def\photobook@vcaptioncell@position{%
\ifKV@vcaptioncell@args@bottomup%
bottom%
\else%
top\fi}}
\define@boolkey{vcaptioncell@args}{after}[true]{%
\def\photobook@vcaptioncell@position{%
\ifKV@vcaptioncell@args@bottomup%
under%
\else%
over\fi}}
% align...
\def\photobook@vcaptioncell@align{}
% XXX for some reason \define@choicekey{..} does not expand macros...
%\define@choicekey{vcaptioncell@args}{align}{flushleft,center,flushright}{%
\define@key{vcaptioncell@args}{align}{%
\def\photobook@vcaptioncell@align{#1}}
% margin...
\def\photobook@vcaptioncell@margin{0pt}
\define@key{vcaptioncell@args}{margin}{%
\def\photobook@vcaptioncell@margin{#1}}
% valign
\def\photobook@vcaptioncell@valign{%
\ifKV@vcaptioncell@args@bottomup%
b%
\else%
t\fi}
\newcommand\vcaptioncell[2][]{%
\setkeys{vcaptioncell@args}{
left,
bottomup,
align=flushleft,
margin=1pt,
#1}%
%
\smash{\makebox[0pt][l]{%
\begin{minipage}[t][\cellheight][\photobook@vcaptioncell@valign]{\cellwidth}%
\begin{\photobook@vcaptioncell@orientation}%
\captioncell[%
\photobook@vcaptioncell@position,
align=\photobook@vcaptioncell@align,
margin=\photobook@vcaptioncell@margin]{#2}%
\end{\photobook@vcaptioncell@orientation}%
\end{minipage}}}%
\ignorespaces}
%% \DescribeMacro{\rcaptioncell\{..\}}
%
%% \EXPERIMENTAL
%%
%% Upside-down caption cell.
%%
% XXX a bit off...
\newcommand\rcaptioncell[2][]{%
\captioncell[align=flushleft, #1]{%
\begin{turn}{180}%
% XXX HACK: RAISEBOX -- need to shift by x-height...
% ...currently this is set to 1/(golden ratio) would
% be nice to make this parametric / font-derived...
\raisebox{1ex * \real{-0.618033988749855}}{#2}%
\end{turn}}%
\ignorespaces}
%% \DescribeMacro{\captionblockcell\{..\}}
%
%% Add caption into a box left/right of current cell.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% celloffsetleft celloffsetleft
%% <-------> v
%% . <--------------> .<-------------> cellwidth
%% <------------------------> <------------------------> cellparentwidth
%% . .. .. .. . .
%% +------------------------+ +------------------------+
%% | | | |
%% | | | |
%% |+-------++ - - - - - - +| |+ - - - - - - ++-------+|
%% || |. .| |. .| ||
%% || |. .| |. .| ||
%% || cap. |. cell .| |. cell .| cap. ||
%% || |. .| |. .| ||
%% || |. .| |. .| ||
%% |+-------++ - - - - - - +| |+ - - - - - - ++-------+|
%% | | | |
%% | | | |
%% +------------------------+ +------------------------+
%% <> clearcaption .. <> clearcaption
%% <> spacing <> spacing
%%
%% \end{verbatim}
%% \end{minipage}
%%
% XXX make captions clear top/bottom of page...
% XXX need to do a caption block -- a cell to one side of an image to the
% end of the page...
% XXX can we use the normal caption and simply insert a minipage of the
% appropriate width???
\newlength\photobook@captionblockcell@tmplen
% left / right
\define@boolkey{captionblockcell@args}{left}[true]{%
\KV@captionblockcell@args@rightfalse}
\define@boolkey{captionblockcell@args}{right}[true]{%
\KV@captionblockcell@args@leftfalse}
% align=flushright|center|flushright
% XXX this should depend on left/right...
\def\photobook@captionblockcell@align{%
\ifKV@captionblockcell@args@left%
flushright%
\else%
flushleft\fi}
\define@key{captionblockcell@args}{align}{%
\def\photobook@captionblockcell@align{#1}}
% valign=t|c|b
% XXX should be a boolkey -- t|c|b???
\edef\photobook@captionblockcell@valign{b}
\define@key{captionblockcell@args}{valign}{%
\edef\photobook@captionblockcell@valign{#1}}
% clearance=<len> (defaults: \clearcaption)
\newlength\photobook@captionblockcell@clearance
\define@key{captionblockcell@args}{clearance}{%
\setlength\photobook@captionblockcell@clearance{#1}}
% XXX should this clear only top/bottom or all sides???
% XXX doc!!
% XXX do we need this here???
\define@boolkey{captionblockcell@args}{constraintoparent}[true]{}
\newlength\photobook@captionblockcell@clearparent
\setlength\photobook@captionblockcell@clearparent{0pt}
\define@key{captionblockcell@args}{clearparent}{%
\setlength\photobook@captionblockcell@clearparent{#1}%
\KV@captionblockcell@args@constraintoparenttrue}
% spacing=<len>
\newlength\photobook@captionblockcell@spacing
\setlength\photobook@captionblockcell@spacing{0pt}
\define@key{captionblockcell@args}{spacing}{%
\setlength\photobook@captionblockcell@spacing{#1}}
% width=<len>
\newlength\photobook@captionblockcell@width
\setlength\photobook@captionblockcell@width{0pt}
\define@key{captionblockcell@args}{width}{%
\setlength\photobook@captionblockcell@width{#1}}
% showbox
\define@boolkey{captionblockcell@args}{showbox}[true]{}
\newcommand\photobook@captionblockcell@content[2][0pt]{%
\hspace{\celloffsetleft}{%
\begin{adjustbox}{
% NOTE: we need to draw the border before we set margins
% to show the original box...
fbox=#1 0pt 0pt,
margin=0pt 0pt 0pt \celloffsettop,
minipage=[t][\cellheight][\photobook@captionblockcell@valign]{\cellwidth},
valign=T}%
\begin{\photobook@captionblockcell@align}%
\ignorespaces%
#2%
\end{\photobook@captionblockcell@align}%
\end{adjustbox}}}
% XXX revise how \clearance is handled...
% XXX do we need top/bottom boxes???
% ...if yes do we need lop/left, top/right, bottom/left and bottom/right???
% XXX should we keep within parent cell if imagecell has negative clearance???
% XXX need to auto-place within images via \offsetleft...
% XXX add tweak support...
\newcommand\captionblockcell[2][]{%
% XXX should this be within the group???
\setkeys{captionblockcell@args}{%
left,
valign=b,
clearance=\clearcaption,
spacing=\captioncellspacing,
#1}%
%
\smash{\makebox[0pt][l]{%
\begingroup%
% setup cell context...
\setlength\clearcaption{%
\photobook@captionblockcell@clearance}%
\setlength\photobook@captionblockcell@tmplen{\cellwidth}%
\setlength\cellwidth{%
\ifnum \photobook@captionblockcell@width = 0%
\dimexpr
\cellparentwidth
- \photobook@captionblockcell@spacing
- \cellwidth
- \clearcaption
% XXX this is only present in images...
- \clearance \relax%
\else%
\photobook@captionblockcell@width\fi}%
\setlength\cellparentwidth{%
\photobook@captionblockcell@tmplen}%
\setlength\celloffsetleft{%
\ifKV@captionblockcell@args@left%
\dimexpr
- \cellwidth%
- \photobook@captionblockcell@spacing \relax%
\else%
\dimexpr
\cellparentwidth
+ \photobook@captionblockcell@spacing \relax%
\fi}%
% clear parent...
% XXX do we need this here???
\ifKV@captionblockcell@args@constraintoparent%
% offset top...
\setlength\celloffsettop{%
\mindim{
\photobook@captionblockcell@clearparent - \celloffsettop
}{
\photobook@captionblockcell@clearparent}}%
% trim cell top...
\ifdim \celloffsettop > 0pt%
\setlength\cellheight{%
\cellheight - \celloffsettop}\fi%
% trim cell bottom...
\ifdim \dimexpr
\cellheight
+ \celloffsettop \relax%
> \dimexpr
\cellparentheight
- \photobook@captionblockcell@clearparent \relax%
\setlength\cellheight{%
\dimexpr
\cellparentheight
- \mindim{
\cellheight - \cellparentheight
}{
2\photobook@captionblockcell@clearparent} \relax}\fi%
% do not clear parent...
\else%
\setlength\celloffsettop{0pt}\fi%
%
% place...
\ifKV@captionblockcell@args@showbox%
\photobook@captionblockcell@content[0.1pt]{#2}%
\else%
\photobook@captionblockcell@content{#2}\fi%
\endgroup}}%
\ignorespaces}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Paper cells
%
%% Paper and page cells are very similar but differ in one aspect -- paper
%% cells represent the paper as indicated by |layoutmode=<layout>| while
%% page cells are always the size of the page block, i.e. |layoutmode=block|.
%%
%% \DescribeEnv{papercell}
%
%% Paper cell.
%%
%% This does not include bleeds.
%%
\newenvironment{papercell}{%
\begin{cell*}{\bleed, \bleed}{\blockwidth}{\blockheight}%
}{%
\end{cell*}}
%% \DescribeEnv{paperbleedcell}
%
%% Paper bleed cell.
%%
%% Like |papercell| but includes bleeds.
%%
\newenvironment{paperbleedcell}{%
\begin{cell*}{0pt, 0pt}{\bleedblockwidth}{\bleedblockheight}%
}{%
\end{cell*}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Page cells
%
%% Page cells always correspond to the page block size, i.e. |layoutmode=block|
%% regardless of the actual |layoutmode| set currently.
%%
%% \DescribeEnv{pagecell}
%% \DescribeEnv{pagecell*}
%
%% Page cell.
%%
%% This corresponds to the visible page in the |layoutmode=block| and
%% does not include bleeds.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% <-> bleed <-> bleed
%%
%% + - - - - - - - - - + + bleed
%% . +---------------+ . v
%% . | | .
%% . | | .
%% . | pagecell | .
%% . | | .
%% . | | .
%% . +---------------+ . + bleed
%% + - - - - - - - - - + v
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% The star version accounts for |\bindingoffset|.
%%
%% Note that |layoutmode|'s other than block will change the paper size
%% but will not affect this either in size (block size) or in position
%% (top-left).
%%
\newenvironment{pagecell}{%
\begin{cell*}{\bleed,\bleed}{\pageblockwidth}{\pageblockheight}%
}{%
\end{cell*}}
\newenvironment{pagecell*}{%
\begin{cell*}{%
\bleed + \ifnumodd{\thepage}{\bindingoffset}{0pt},%
\bleed}%
{\pageblockwidth - \bindingoffset}%
{\pageblockheight}%
}{%
\end{cell*}}
%% \DescribeEnv{pagebleedcell}
%
%% Like |page| but includes bleeds.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% <-> bleed <-> bleed
%%
%% +-------------------+ + bleed
%% | + - - - - - - - + | v
%% | . . |
%% | . . |
%% | . pagebleedcell . |
%% | . . |
%% | . . |
%% | + - - - - - - - + | + bleed
%% +-------------------+ v
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Note that as with |pagecell| this is not affected by |layoutmode|.
%%
\newenvironment{pagebleedcell}{%
\begin{cell*}{0pt, 0pt}{\bleedblockwidth}{\bleedblockheight}%
}{%
\end{cell*}}
% XXX EXPERIMENTAL / TEST...
\NewEnviron{shipoutbgcell}{%
\AddToShipoutPictureBG*{%
\begin{pagecell}%
\BODY%
\end{pagecell}}%
\ignorespaces}
% XXX EXPERIMENTAL / TEST...
%% \DescribeEnv{textcell}
%
%% \EXPERIMENTAL
%%
%% A cell taking up the page text block.
%
%% >> \begin{textcell}{<width>}{<height>} ... \end{textcell}
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% <-----------> \textwidth
%%
%% <-----------------> \pageblockwidth
%%
%% +-----------------+ ^ \pageblockheight
%% | | |
%% | +-----------+ | | ^ \textheight
%% | | | | | |
%% | | | | | |
%% | | textcell | | | |
%% | | | | | |
%% | | | | | |
%% | +-----------+ | | v
%% | | |
%% +-----------------+ v
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Note that this is an inline cell and if something is on the page it
%% may not be centered properly.
%%
\newenvironment{textcell}{%
\begin{inlinecell*}{\textwidth}{\textheight}%
}{%
\end{inlinecell*}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Foldout page cells
%
%% \EXPERIMENTAL
%%
%% A foldout is a special case cell that changes the page format.
%%
%% In addition to cell lengths a foldout defines a set of additional
%% lengths and lists within its context.
%%
%% \DescribeMacro{\pagefoldpanels=<list>}
%% \DescribeMacro{\pagefoldpanelfolds=<list>}
%
%% Lists page folded panel widths and fold types respectively.
%%
%% |pagefoldpanels| is set automatically for layouts other than |block|
%% and for foldout pages, changing this can mess up fold markers and
%% page cell placement.
%%
%% |pagefoldpanelfolds| is generated when creating a foldout.
%%
%% See:
%% \href{https://ctan.altspu.ru/macros/generic/listofitems/listofitems-en.pdf}{listofitems}
%% for list API.
%%
% XXX add a generic panel constructor..
% \foldedcell[<height>]{<index>}
% NOTE: these are wrapped in \@ifundefined{..} to prevent overwriting when
% values are defined in \InitPages...
\@ifundefined{pagefoldpanels}{%
\def\pagefoldpanels{}}{}
\@ifundefined{pagefoldpanelfolds}{%
\def\pagefoldpanelfolds{}}{}
%% \DescribeMacro{\foldoutwidth=<len>}
%
%% Total foldout page width, calculated when a foldout page is created.
%%
\newlength\foldoutwidth
\setlength\foldoutwidth{\blockwidth}
%% \DescribeEnv{foldout}
%
%% Create 2 or more pages in foldout mode.
%
%% >> \begin{foldout}[<fold-spec>] ... \end{foldout}
%
%% |<fold-spec>| can be a number of folds, or contain one or more fold
%% types (|in| or |out|), two or more panel widths (dimensions) or a
%% sequence of both (i.e. dim fold dim ...) where missing widths are
%% automatically calculated and missing folds are the same as the previous
%% fold or the default if no folds are specified.
%%
%% If not |<fold-spec>| is given, then the value of |\defaultfoldout| is
%% used (default: |2|).
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% v \flatfold v
%%
%% - --=----------------++---------------++--------------+
%% = .. .. |
%% = .. .. |
%% = .. .. |
%% = .. .. |
%% = .. .. |
%% = .. .. |
%% = .. .. |
%% = .. .. |
%% = .. .. |
%% = (1) .. (2) .. (3) |
%% - --=----------------++---------------++--------------+
%%
%% +--------------++---------------++----------------=-- -
%% | .. .. =
%% | .. .. =
%% | .. .. =
%% | .. .. =
%% | .. .. =
%% | .. .. =
%% | .. .. =
%% | .. .. =
%% | .. .. =
%% | (1) .. (2) .. (3) =
%% +--------------++---------------++----------------=-- -
%%
%% ^ \flatfold ^
%%
%% \end{verbatim}
%% \end{minipage}
%%
%%
%% A foldout always starts on the right/odd page and will always end on
%% the left/even page.
%%
%% If |\foldoutpages{..}| is called on an even page, an empty normal
%% page will be created pushing the foldout to the right page of the
%% spread. If an odd number of pages is created the set will be padded
%% with an empty page before |\foldoutpages{..}| exits.
%%
%%
%% Foldout panel numbering
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% right page
%% - --=-------+-------+- --+-------+-------+
%% = | | | | |
%% = (1) | (2) | ... | (n-1) | (n) |
%% = | | | | |
%% - --=-------+-------+-- -+-------+-------+
%%
%% left page
%% +-------+-------+- --+-------+-------=-- -
%% | | | | | =
%% | (1) | (2) | ... | (n-1) | (n) =
%% | | | | | =
%% +-------+-------+-- -+-------+-------=-- -
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Formal |<fold-spec>| grammar:
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%% <fold-spec> ::
%% <count>
%% | <fold>
%% | <panels>
%% <panels> ::=
%% <panel>
%% | <panel> <panels>
%% <panel> ::=
%% <width> <fold>
%% | <width>
%% | <fold>
%% <fold> ::=
%% in | out
%% \end{verbatim}
%% \end{minipage}
%%
%
%% \DescribeMacro{\clearfoldoutbinding=<len>}
%% \DescribeMacro{\clearfoldoutedge=<len>}
%% \DescribeMacro{\clearfoldoutfold=<len>}
%
%% Fold panel sizing for similar fold sequence:
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% \clearfoldoutedge <->
%% \clearfoldoutfold <->
%% <--> \clearfoldoutbinding
%% (3) /\ (2)
%% +---------------------------------+ / \
%% +------------------------------- | /
%% -------------------------------------+ / (1)
%% ======================================== =====+=====
%% ========================================
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Note that |in in| fold sequence is drawn, |out out| is identical in
%% sizing but reflectd.
%%
%%
%% Fold panel sizing for dissimilar fold sequence:
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% \clearfoldoutedge <-> /
%% <--> \clearfoldoutbinding (3) /
%% \
%% +---------------------------------- \ (2)
%% +---------------------------------+ /
%% -------------------------------------+ / (1)
%% ======================================== =====+=====
%% ========================================
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% |in out| is drawn, |out it| is the same but reflected.
%%
%% The size of the paper fold is set by |\flatfold|.
%%
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
% Fold marks...
% draw in/out fold mark...
%
% >> \foldinmark[<baseline>]
% >> \foldoutmark[<baseline>]
%
% NOTE: these should be used in a box.
% NOTE: these are centered in origin.
%
% XXX these can affect the items after -- need to encapsulate better + test...
% XXX do we need to make centering block size dependant on \foldmarksize
% or are the two independent??? (test)
% XXX MARKOFFSET for some reason splitting the \vspace{..} into a
% arg-dependant and a foldmarklen-dependant parts below yields
% wrong results...
% ...not that simply splitting the original into two \vspace{..}
% calls works fine...
\newsavebox\photobook@foldinmark
\newsavebox\photobook@foldoutmark
\newcommand\ResetFoldMarks{%
\sbox{\photobook@foldinmark}{%
% XXX MARKOFFSET
%\vspace{0.5\photobook@foldmarklen}%
\smash{\makebox[0pt][l]{%
% size-agnostic centering...
\hspace{-5mm}{\makebox[1cm][c]{%
\begin{tikzpicture}%
\draw[white, ultra thick]
(-0.3333\photobook@foldmarklen,0.3333\photobook@foldmarklen)
-- (0,0)
-- (0.3333\photobook@foldmarklen,0.3333\photobook@foldmarklen);
\draw[white, ultra thick]
(0,0.6666\photobook@foldmarklen)
-- (0,-0.3333\photobook@foldmarklen);
\draw[black, thin]
(-0.3333\photobook@foldmarklen,0.3333\photobook@foldmarklen)
-- (0,0)
-- (0.3333\photobook@foldmarklen,0.3333\photobook@foldmarklen);
\draw[black, thin]
(0,0.6666\photobook@foldmarklen)
-- (0,-0.3333\photobook@foldmarklen);
\end{tikzpicture}}}}}}
\sbox{\photobook@foldoutmark}{%
% XXX MARKOFFSET
%\vspace{0.5\photobook@foldmarklen}%
\smash{\makebox[0pt][l]{%
% size-agnostic centering...
\hspace{-5mm}{\makebox[1cm][c]{%
\begin{tikzpicture}%
\draw[white, ultra thick]
(-0.3333\photobook@foldmarklen,0)
-- (0,0.3333\photobook@foldmarklen)
-- (0.3333\photobook@foldmarklen,0);
\draw[white, ultra thick]
(0,0.6666\photobook@foldmarklen)
-- (0,-0.3333\photobook@foldmarklen);
\draw[black, thin]
(-0.3333\photobook@foldmarklen,0)
-- (0,0.3333\photobook@foldmarklen)
-- (0.3333\photobook@foldmarklen,0);
\draw[black, thin]
(0,0.6666\photobook@foldmarklen)
-- (0,-0.3333\photobook@foldmarklen);
\end{tikzpicture}}}}}}}
\ResetFoldMarks
% XXX EXPERIMENTAL...
% XXX not sure if this should ever be needed...
%\newcommand\setfoldmarksize[1][6mm]{%
% \setlength\photobook@foldmarklen{#1}%
% %\edef\photobook@foldmarklen{#1}%
% \ResetFoldMarks}
% >> \foldinmark[<baseline>]
\newcommand\foldinmark[1][0pt]{%
% XXX MARKOFFSET
%\vspace{#1}%
\vspace{\dimexpr 0.5\photobook@foldmarklen + #1 \relax}%
\usebox\photobook@foldinmark}
% >> \foldoutmark[<baseline>]
\newcommand\foldoutmark[1][0pt]{
% XXX MARKOFFSET
%\vspace{#1}%
\vspace{\dimexpr 0.5\photobook@foldmarklen + #1 \relax}%
\usebox\photobook@foldoutmark}
% >> \photobook@foldmark[<baseline>]{<type>}{<left>, <top>}
\newif\ifphotobook@foldmark@in
\newcommand\photobook@foldmark[3][0pt]{%
\begingroup%
\ifnumodd{\thepage}{%
\ifthenelse{\equal{#2}{in}}{%
\photobook@foldmark@intrue}{%
\photobook@foldmark@infalse}}{%
\ifthenelse{\equal{#2}{in}}{%
\photobook@foldmark@infalse}{%
\photobook@foldmark@intrue}}%
\begin{textblock*}{0pt}(#3)%
\ifphotobook@foldmark@in%
\foldinmark[#1]%
\else%
\foldoutmark[#1]\fi%
\end{textblock*}%
\endgroup}
\newcommand\photobook@topfoldmark[2][in]{%
\photobook@foldmark[-0.5\photobook@foldmarklen]{#1}{#2}}
\newcommand\photobook@bottomfoldmark[2][in]{%
\photobook@foldmark[0.5\photobook@foldmarklen]{#1}{#2}}
% >> \photobook@markfold[<fold>]{<offset>}
\newcommand\photobook@markfold[2][in]{%
\photobook@topfoldmark[#1]{
#2,
\bleed
- \foldmarkoffset}%
\photobook@bottomfoldmark[#1]{
#2,
\blockheight
+ \bleed
+ \foldmarkoffset}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
\newlength\photobook@foldout@panelwidth
\setlength\photobook@foldout@panelwidth{0pt}
\newlength\photobook@foldout@maxpanelwidth
\setlength\photobook@foldout@maxpanelwidth{0pt}
\edef\photobook@foldout@count{}
\edef\photobook@foldout@prevfold{in}
% >> \photobook@foldout@pushpanel{<width>}{<fold>}
%
% XXX should we set maxpanelwidth when manually setting panel widths???
% XXX might be good to warn the user if the manual fold will not work...
% after two folds in same direction panels must be strictly smaller...
% ...would be nice to maintain maxpanelwidth and warn if explicit
% width is larger...
\newcommand\photobook@foldout@pushpanel[2]{%
% initial max panel size...
\ifnum \thephotobook@foldoutpanel = 1%
\setlength\photobook@foldout@maxpanelwidth{%
\blockwidth
- \clearfoldoutedge}\fi%
% panel #2 -- clear binding...
\ifnum \thephotobook@foldoutpanel = 2%
\setlength\photobook@foldout@maxpanelwidth{%
\photobook@foldout@maxpanelwidth
- \clearfoldoutbinding}\fi%
% calculate widths...
\ifdim #1 = 0pt%
% first two panels do not need fold compensation...
\ifnum \thephotobook@foldoutpanel < 3%
\setlength\photobook@foldout@panelwidth{%
\photobook@foldout@maxpanelwidth
+ \flatfold}%
\else%
% double fold twice in same direction...
\ifthenelse{\equal{#2}{\photobook@foldout@prevfold}}{%
\setlength\photobook@foldout@panelwidth{%
\photobook@foldout@maxpanelwidth
+ \flatfold
- \clearfoldoutfold}%
% different fold directions -- no resizing needed here...
}{%
\setlength\photobook@foldout@panelwidth{%
\photobook@foldout@maxpanelwidth
+ \flatfold}}\fi%
\setlength\photobook@foldout@maxpanelwidth{%
\photobook@foldout@panelwidth}%
% explicit width...
\else%
% XXX should we set the maxpanelwidth here too???
% ...if yes, should we be more thorough and size it to the
% available space (accounting for last two folds)??
%\setlength\photobook@foldout@maxpanelwidth{#1}%
\setlength\photobook@foldout@panelwidth{#1}\fi%
% accumulate width...
\setlength\foldoutwidth{
\foldoutwidth
+ \photobook@foldout@panelwidth}%
% panel spec lists...
\edef\pagefoldpanelfolds{%
\pagefoldpanelfolds,#2}%
\edef\pagefoldpanels{%
\pagefoldpanels,\the\photobook@foldout@panelwidth}%
\stepcounter{photobook@foldoutpanel}}
% XXX also add this to jacket/cover/endpaper...
\newlength\photobook@showmarks@offset
\setlength\photobook@showmarks@offset{0pt}
\newcommand\photobook@showmarks{%
% XXX make this a list-length check...
\ifx \pagefoldpanels \empty \else%
\begingroup%
\setlength\photobook@showmarks@offset{\bleed}%
% NOTE: we need to iterate left/right pages in reverse order...
% NOTE: the below branches are similar but not identical...
\ifnumodd{\thepage}{%
\xintFor* ##1 in {\xintSeq{1}{\pagefoldpanelslen - 1}} \do {%
\setlength\photobook@showmarks@offset{
\photobook@showmarks@offset
+ \pagefoldpanels[##1]}%
% XXX HACK: it appears that we can't expand \pagefoldpanelfolds[##1] in [..]...
\edef\photobook@showmarks@tmp{\pagefoldpanelfolds[##1]}%
\photobook@markfold[\photobook@showmarks@tmp]{\photobook@showmarks@offset}}%
}{
\xintFor* ##1 in {\xintSeq{\pagefoldpanelslen}{2}} \do {%
\setlength\photobook@showmarks@offset{
\photobook@showmarks@offset
+ \pagefoldpanels[##1]}%
% XXX HACK: it appears that we can't expand \pagefoldpanelfolds[##1] in [..]...
\edef\photobook@showmarks@tmp{\pagefoldpanelfolds[##1 - 1]}%
\photobook@markfold[\photobook@showmarks@tmp]{\photobook@showmarks@offset}}}%
\endgroup\fi}
\AtBeginShipout{%
\iffoldmarks%
\photobook@showmarks\fi}
\newcounter{photobook@foldoutpanel}
\setcounter{photobook@foldoutpanel}{1}
\newenvironment{foldout}[1][\defaultfoldout]{%
\begingroup%
\setsepchar{ }%
\readlist*\photobook@foldout@args{#1}%
%
% defaults...
\setcounter{photobook@foldoutpanel}{1}
\setlength\foldoutwidth{0pt}%
\edef\photobook@foldout@prevfold{\pagefold}%
%
% panel count...
\ifnum \photobook@foldout@argslen = 1%
% in/out...
\ifthenelse{
\equal{#1}{in}
\OR \equal{#1}{out}}{%
\edef\photobook@foldout@count{2}%
\edef\photobook@foldout@prevfold{#1}%
% count...
}{%
\edef\photobook@foldout@count{#1}}%
%
% build the panels...
\xintFor* ##1 in {\xintSeq{1}{\photobook@foldout@count}} \do {%
\photobook@foldout@pushpanel{%
0pt}{\photobook@foldout@prevfold}}%
% fold spec...
\else%
\foreachitem \photobook@foldout@opt \in \photobook@foldout@args{%
% in/out...
\ifthenelse{
\equal{\photobook@foldout@opt}{in}
\OR \equal{\photobook@foldout@opt}{out}}{%
\photobook@foldout@pushpanel{%
\photobook@foldout@panelwidth}{\photobook@foldout@opt}%
% prep for next panel...
\edef\photobook@foldout@prevfold{%
\photobook@foldout@opt}%
\setlength\photobook@foldout@panelwidth{0pt}%
% explicit size...
}{%
% finalize prev panel...
\ifdim \photobook@foldout@panelwidth > 0pt%
\photobook@foldout@pushpanel{%
\photobook@foldout@panelwidth}{\photobook@foldout@prevfold}\fi%
%
\setlength\photobook@foldout@panelwidth{\photobook@foldout@opt}}}%
% add trailing panel...
\photobook@foldout@pushpanel{%
\photobook@foldout@panelwidth}{\photobook@foldout@prevfold}%
\fi%
% prepare data for cells...
\setsepchar{,}%
% NOTE: the first element is empty due to how we create these
% i.e. ('' + ',<value>')...
\ignoreemptyitems%
\readlist*\pagefoldpanelfolds{\pagefoldpanelfolds}%
\readlist*\pagefoldpanels{\pagefoldpanels}%
%
% pages...
% NOTE: we'll keep the start of the foldout set at the right page
% and end it on the left page.
\cleardoublepage%
\begin{resizedpages}{\foldoutwidth}{\blockheight}%
\ignorespaces%
}{%
\cleardoublepage%
\end{resizedpages}%
\endgroup}
%% \DescribeEnv{foldoutcell}
%% \DescribeEnv{foldoutcell*}
%
%% Create a cell spanning one or more foldout panels.
%
%% >> \begin{foldoutcell}[<num>] ... \end{foldoutcell}
%% >> \begin{foldoutcell}[<from>-<to>] ... \end{foldoutcell}
%
%% If no arguments are given this will create a panel at |foldoutpanel|
%% counter and increment it by one.
%
%% >> \begin{foldoutcell} ... \end{foldoutcell}
%
%% This will also auto-advance the page when all panels are filled.
%%
%% Note that manual panel placement has no effect on the panel counter
%% thus care must be taken when mixing manual and auto-advanced panels.
%% Also note that |foldoutpanel|'s value is not maintained within manually
%% placed panels and should be treated as undefined.
%%
%% |foldoutcell*| is the same as the non-star version but creates cells
%% including bleeds.
%%
%% Neither version clips its content, to explicitly clip use the |cliptocell|
%% environment.
%%
%% These can only be used from within a |foldout| cell.
%%
% XXX should we be able to turn clipping on/off???
\newlength\photobook@foldoutcell@left
\setlength\photobook@foldoutcell@left{0pt}
\newlength\photobook@foldoutcell@width
\setlength\photobook@foldoutcell@width{0pt}
% calculate offset via \pagefoldpanels and write to dimension <name>...
% >> \photobook@foldoutcell@setfoldoutoffset{<name>}{<from>}{<to>}
%
% NOTE: [<from>, <to>[ -- i.e. <to> is not included...
\newcommand\photobook@foldoutcell@setfoldoutoffset[3]{%
\expandafter\setlength\csname #1\endcsname{0pt}%
\ifnum \numexpr #2 \relax < \numexpr #3 \relax%
\xintFor* ##1 in {%
\xintSeq{#2}{\xintiiMin{#3}{\pagefoldpanelslen + 1} - 1}} \do {%
\ifnumodd{\thepage}{%
\expandafter\setlength\csname #1\endcsname{%
\csname #1\endcsname%
+ \pagefoldpanels[##1]}
}{%
\expandafter\setlength\csname #1\endcsname{%
\csname #1\endcsname%
+ \pagefoldpanels[-\numexpr ##1 \relax]}}}\fi}
% foldout panel auto-advance counter...
\newcounter{foldoutpanel}
\setcounter{foldoutpanel}{0}
\edef\photobook@foldoutcell@from{0}
% reset panel count on each page...
\AtBeginShipout{%
\setcounter{foldoutpanel}{0}
\edef\photobook@foldoutcell@from{%
\thefoldoutpanel}}
% set panel left/width dimensions (helper)...
% >> \photobook@foldoutcell@setdimensions[<panel-spec>]
%
% NOTE: for <panel-spec> see docs for foldoutcell/foldoutcell*...
\newcommand\photobook@foldoutcell@setdimensions[1][0]{
% parse args...
\setsepchar{-}%
\readlist*\photobook@foldoutcell@panels{#1}%
%
% auto advance panel...
\ifnum \photobook@foldoutcell@panels[1] = 0%
% auto advance page...
\ifnum \value{foldoutpanel} = \pagefoldpanelslen%
% NOTE: this will reset the counter...
\newpage\fi%
\stepcounter{foldoutpanel}%
\global\edef\photobook@foldoutcell@from{%
\thefoldoutpanel}%
% explicit panels...
\else%
\global\edef\photobook@foldoutcell@from{
\photobook@foldoutcell@panels[1]}\fi%
% left offset...
\photobook@foldoutcell@setfoldoutoffset{photobook@foldoutcell@left}{%
1
}{%
\photobook@foldoutcell@from}%
% panel from-to width...
\ifnum \photobook@foldoutcell@panelslen > 1%
\photobook@foldoutcell@setfoldoutoffset{photobook@foldoutcell@width}{%
\photobook@foldoutcell@from%
}{%
\photobook@foldoutcell@panels[2] + 1}%
% panel N width...
\else%
\ifnumodd{\thepage}{%
\setlength\photobook@foldoutcell@width{%
\pagefoldpanels[{\photobook@foldoutcell@from}]}
}{%
\setlength\photobook@foldoutcell@width{%
\pagefoldpanels[-\numexpr \photobook@foldoutcell@from \relax]}}\fi}
\newenvironment{foldoutcell}[1][0]{%
% XXX check if outside of foldout -> warn...
\begingroup%
\photobook@foldoutcell@setdimensions[#1]%
\begin{cell*}{%
\bleed
+ \photobook@foldoutcell@left,%
\bleed}%
{\photobook@foldoutcell@width}%
{\pageblockheight}%
}{%
\end{cell*}%
\endgroup}
\newenvironment{foldoutcell*}[1][0]{%
% XXX check if outside of foldout -> warn...
\begingroup%
\photobook@foldoutcell@setdimensions[#1]%
% add bleed to first/last panel...
\ifnum \photobook@foldoutcell@from = 1%
\setlength\photobook@foldoutcell@width{%
\bleed
+ \photobook@foldoutcell@width}
\else%
\setlength\photobook@foldoutcell@left{%
\bleed
+ \photobook@foldoutcell@left}\fi%
\ifnum \photobook@foldoutcell@from = \pagefoldpanelslen%
\setlength\photobook@foldoutcell@width{%
\bleed
+ \photobook@foldoutcell@width}\fi%
\begin{cell*}{%
\photobook@foldoutcell@left,%
0pt}%
{\photobook@foldoutcell@width}%
{\pageblockheight + 2\bleed}%
}{%
\end{cell*}%
\endgroup}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Multi-page cells
%
%% \DescribeEnv{spreadtopages}
%% \DescribeEnv{spreadtopages*}
%% \DescribeMacro{\usespreadpage\{..\}}
%% \DescribeMacro{\usespreadpage*\{..\}}
%
%% Spread cell into pages.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% +----------------------------------- -
%% | <-- input cell
%% | . . .
%% | Oversized content cell...
%% | . . .
%% |
%% +----------.----------.----------.-- -
%% . . . . . . .
%% . . . . . . .
%% +----------+ +----------+ +----------+ +-- -
%% | | | | | | | <-- output pages
%% | | | | | | |
%% | Overs| |ized conte| |nt cell...| |
%% | | | | | | |
%% | | | | | | |
%% +----------+ +----------+ +----------+ +-- -
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% |spreadtopages| creates a cell and spreads it into pages right away.
%%
%% >> \begin{spreadtopages} .. \end{spreadtopages}
%% >> \begin{spreadtopages}[<page-count>] .. \end{spreadtopages}
%%
%% |spreadtopages*| creates a named save cell only allowing the pages
%% to be placed manually via |\usespreadpage{..}|.
%%
%% >> \begin{spreadtopages*}{<name>} .. \end{spreadtopages*}
%% >> \begin{spreadtopages*}[<page-count>]{<name>} .. \end{spreadtopages*}
%%
%% |\usespreadpage{..}| places a page from a saved cell.
%%
%% >> \usespreadpage{<name>}
%% >> \usespreadpage[<page-num>]{<name>}
%%
%% |\usespreadpage*{..}| is the same as the non-star version but will
%% not use a |page| environment, enabling the user to populate the page
%% with other elements.
%%
%% Page numbers are 1-based.
%%
%% Note that the cell created by |spreadtopages*| env is a normal save
%% cell and can be manipulated via |\usecell{..}| and |\usecell*{..}|.
%%
% XXX add nudge/grow support...
\NewEnviron{spreadtopages*}[2][2]{%
% setup page count...
\@ifundefined{thespreadtopages#2page}{%
\newcounter{spreadtopages#2page}}{}
\setcounter{spreadtopages#2page}{1}
%
\begingroup%
% create the actual cell...
\setlength\cellparentwidth{\cellwidth}%
\setlength\cellparentheight{\cellheight}%
\setlength\cellwidth{#1\pageblockwidth}%
\setlength\cellheight{\pageblockheight}%
%
\gsavecell{#2}{\cellwidth}{\cellheight}{\BODY}%
\endgroup%
\ignorespaces}
% NOTE: this essentially counts pages, \usecell{..} / \usecell*{..} are
% better suited for custom stuff...
% NOTE: page is a 1 based offset in pages and can be fractional...
% NOTE: \usecell*{..} takes care of all the bleed calculations...
\def\usespreadpage{\@ifstar{%
\photobook@usespreadpage@star%
}{%
\photobook@usespreadpage}}
\newcommand\photobook@usespreadpage@star[2][]{%
\begin{pagecell}%
% auto advance pages...
\ifthenelse{\equal{#1}{}}{%
\usecell*{#2}%
(0pt, \numexpr \value{spreadtopages#2page} - 1 \relax\cellwidth)%
{\cellwidth}{\cellheight}%
\stepcounter{spreadtopages#2page}%
% manual page selected...
}{%
\usecell*{#2}%
(0pt, \numexpr #1 - 1 \relax\cellwidth)%
{\cellwidth}{\cellheight}}%
\end{pagecell}}
\newcommand\photobook@usespreadpage[2][]{%
\begin{page}%
\usespreadpage*[#1]{#2}%
\end{page}}
\NewEnviron{spreadtopages}[1][2]{%
\begingroup%
% create the actual cell...
\setlength\cellparentwidth{\cellwidth}%
\setlength\cellparentheight{\cellheight}%
\setlength\cellwidth{#1\pageblockwidth}%
\setlength\cellheight{\pageblockheight}%
%
\savecell{photobook@spreadtopages}{\cellwidth}{\cellheight}{\BODY}%
%
% place the pages...
\foreach \photobook@spreadtopages@page in {1, ..., #1}{%
\usespreadpage[\photobook@spreadtopages@page]{photobook@spreadtopages}}%
\endgroup%
\ignorespaces}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Endpaper cells
%
%% \DescribeEnv{leftside}
%% \DescribeEnv{rightside}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% +---------------+---------------+
%% | | |
%% | | |
%% | leftside | rightside |
%% | | |
%% | | |
%% +---------------+---------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
% XXX for some reason naming these anything starting with endpaper will
% make LaTeX complain that that is already defined...
% ...collision with bools???
\newenvironment{leftside}{%
\begin{pagecell}%
}{%
\end{pagecell}}
\newenvironment{rightside}{%
\begin{cell*}%
{\bleed + \pageblockwidth, \bleed}%
{\pageblockwidth}{\pageblockheight}%
}{%
\end{cell*}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Cover and dust jacket cells
%
%% \DescribeEnv{frontcover}
%% \DescribeEnv{backcover}
%
%% \DescribeEnv{spine}
%% \DescribeEnv{vspine}
%
%% \DescribeEnv{frontflap}
%% \DescribeEnv{backflap}
%
%% Covers and dust jackets differ only in that covers do not {usually}
%% have flaps.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% backflap spine/vspine frontflap
%% . backcover . frontcover .
%% v v v v v
%% +---+---------------+---+---------------+---+
%% | | | | | |
%% | | | | | |
%% | | Back | | Front | |
%% | | | | | |
%% | | | | | |
%% +---+---------------+---+---------------+---+
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Note that when typesetting a spine with both top-down and bottom-up
%% text it is recommended to use |topdown|/|bottomup| in |zinlinecell|'s
%% in a normal |spine| rather than using a |vspine| and trying to rotate
%% part of the content.
%%
\newenvironment{frontcover}{%
\begin{cell*}{
\bleed
+ \jacketflapback
+ \coverflap
+ \jacketwrap
+ \coverboardgrow
+ \pageblockwidth
+ 2\spinefold
+ \spinewidth,
\bleed
+ \coverflap }%
{ \pageblockwidth + \coverboardgrow }%
{ \pageblockheight + 2\coverboardgrow }%
}{%
\end{cell*}}
\newenvironment{backcover}{%
\begin{cell*}{
\bleed
+ \jacketflapback
+ \coverflap
+ \jacketwrap,
\bleed
+ \coverflap }%
{ \pageblockwidth + \coverboardgrow }%
{ \pageblockheight + 2\coverboardgrow }%
}{%
\end{cell*}}
% spines...
%
\newenvironment{spine}{%
\begin{cell*}{
\bleed
+ \jacketflapback
+ \coverflap
+ \jacketwrap
+ \coverboardgrow
+ \pageblockwidth
+ \spinefold,
\bleed
+ \coverflap }%
{ \spinewidth }%
{ \pageblockheight + 2\coverboardgrow }%
}{%
\end{cell*}}
\newenvironment{vspine}[1][topdown]{%
\def\photobook@vspine@orientation{#1}%
%
\begin{spine}%
\begin{\photobook@vspine@orientation}%
}{%
\end{\photobook@vspine@orientation}%
\end{spine}}
% jackets flaps...
%
\newenvironment{frontflap}{%
\begin{cell*}{
\bleed
+ \jacketflapback
+ 2\jacketwrap
+ 2\coverboardgrow
+ 2\pageblockwidth
+ 2\spinefold
+ \spinewidth,
\bleed
+ \coverflap }%
{ \jacketflapfront }%
{ \pageblockheight + 2\coverboardgrow }%
}{%
\end{cell*}}
\newenvironment{backflap}{%
\begin{cell*}{
\bleed,
\bleed
+ \coverflap }%
{ \jacketflapback }%
{ \pageblockheight + 2\coverboardgrow }%
}{%
\end{cell*}}
%----------------------------------------------------------------------
%%%% Caption Templates
% XXX need to be able to configure/pass/override:
% - size / \captionsize...
% - color...
%% \DescribeMacro{\captionsize\{..\}}
%
%% Defines the caption font.
%%
%% Can be redefined to control caption font/style.
%%
\ResettableMacro{captionsize}{%
\fontsize{6.5pt}{8pt}\selectfont}
%% \DescribeMacro{\captionformat\{..\}}
%
%% General caption format.
%
%% >> \captionformat{<code>}
%
%% This can be redefined to control the image caption.
%%
\ResettableMacro{captionformat}[1]{%
\adjustbox{
margin=0.1em 0.2em,
varwidth=\cellwidth}{%
\captionsize #1}}
%----------------------------------------------------------------------
%%%% Page Templates
%
%% This section contains a set of predefined configurable single-page
%% templates.
%%
% XXX PRECLEAR this may lead to pages collapsing on each other, test...
%
%% Note that most page templates do not |\clearpage| before expanding,
%% this enables one to prepend elements (like pdf comments), if clearing
%% a page is required add |\clearpage| manually before the template.
%%
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Tweaking
%
%% Most page/spread templates provide an ability to externally "tweak"
%% some image proportions.
%%
%% This is an alternative means to setting template properties, e.g:
%
%% \begin{verbatim}
%% \tweakimagescale{0.8}
%% \ImagePage{image}
%% \end{verbatim}
%
%% Is equivalent to:
%
%% >> \ImagePage[scale=0.8]{image}
%
%% Tweaks get reset after each template.
%%
%% \DescribeMacro{\imagescale=<num>}
%% \DescribeMacro{\imageoffsettop=<len>}
%% \DescribeMacro{\imageoffsetleft=<len>}
%
%% Tweak next image templates scale/offsettop/offsetleft
%%
%% Note that |\imagescale| is not a length.
%
%% >> \edef\imagescale{<scale>}
%% >> \setlength\imageoffsettop{<len>}
%% >> \setlength\imageoffsetleft{<len>}
%%
\edef\imagescale{1}
% NOTE: these are initialized later by \resetimagetweaks...
\newlength\imageoffsettop
\newlength\imageoffsetleft
%% \DescribeMacro{\tweakimagescale\{..\}}
%% \DescribeMacro{\tweakimageoffsettop\{..\}}
%% \DescribeMacro{\tweakimageoffsetleft\{..\}}
%
%% Convenience commands
%%
%% These provide a uniform interface for tweaking.
%
%% >> \tweakimagescale{<scale>}
%% >> \tweakimageoffsettop{<len>}
%% >> \tweakimageoffsetleft{<len>}
%%
\newcommand\tweakimagescale[1]{%
\edef\imagescale{#1}}
\newcommand\tweakimageoffsettop[1]{%
\setlength\imageoffsettop{#1}}
\newcommand\tweakimageoffsetleft[1]{%
\setlength\imageoffsetleft{#1}}
%% \DescribeMacro{\resetimagetweaks\{..\}}
%
%% Reset tweaked values.
%%
\newcommand\resetimagetweaks{%
\edef\imagescale{1}%
\setlength\imageoffsettop{0pt}%
\setlength\imageoffsetleft{0pt}}
% setup initial state...
\resetimagetweaks
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
% meta-commands...
%M \DescribeMacro{\ImagePageTemplate\{..\}}
%
%M >> \ImagePageTemplate{<name>}{<code>}
%
%M This will define two commands:
%
%M >> \<name>[<options>]{<caption>}{<code>}
%M >> \<name>*[<options>]{<caption>}{<code>}
%
%M |\<name>{..}| will use |\<name>Caption{..}| template command to typeset
%M the image caption while |\<name>*{..}| will show the caption as-is.
%M
\def\ImagePageTemplate#1#2{%
% handle <macro>* version...
\expandafter\def\csname #1\endcsname{\@ifstar{%
\csname photobook@ImagePageTemplate@#1@star\endcsname%
}{%
\csname photobook@ImagePageTemplate@#1\endcsname}}%
% main implementation (raw caption)...
\expandafter\newcommand\csname photobook@ImagePageTemplate@#1@star\endcsname[3][]{%
#2%
\resetimagetweaks}%
% main implementation with caption template...
\expandafter\newcommand\csname photobook@ImagePageTemplate@#1\endcsname[3][]{%
\csname photobook@ImagePageTemplate@#1@star\endcsname[##1]{%
\@ifundefined{#1Caption}{%
##2%
}{%
\csname #1Caption\endcsname{##2}}}{##3}}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
\newsavebox\photobook@imagebox
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% General interface
%
%% A templates provide a uniform interface consisting of several commands:
%%
%% Base template command:
%
%% >> \<template-name>{<caption>}{<image>}
%% >> \<template-name>[<options>]{<caption>}{<image>}
%
%% |<options>| is the same as for |\imagecell{..}|.
%%
%% Template-specific caption command:
%
%% >> \<template-name>Caption{<caption>}
%
%% This can be redefined to control typesetting the caption for all
%% consecutive templates.
%%
%% Reset template caption to default:
%
%% >> \reset<template-name>Caption
%
%% An equivalent to the non-star version but use the caption as-is:
%
%% >> \<template-name>*{<caption>}{<image>}
%% >> \<template-name>*[<options>]{<caption>}{<image>}
%
%% Note that thogh some template versions differ only in |<options>|
%% defaults passed to |\imagecell{..}|, they are split to provide ability
%% to configure the template defaults separately.
%%
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% No bleed
%% \DescribeMacro{\ImagePage\{..\}}
%% \DescribeMacro{\ImagePageCaption\{..\}}
%% \DescribeMacro{\resetImagePageCaption}
%% \DescribeMacro{\ImagePage*\{..\}}
%
%% Basic image page
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% +-----------------+
%% | |
%% | +-------------+ |
%% | | . . | |
%% | | . . | |
%% | | image | |
%% | | . . | |
%% | | . . | |
%% | +-------------+ |
%% | c |
%% | |
%% +-----------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Create an image page:
%%
%% Note that |\ImagePage{..}| only supports tweaking |scale|, this is
%% intentional ad tweaking offset will mess up page alignment relative
%% to other pages in a book.
%%
\ResettableMacro{ImagePageCaption}[1]{%
\captioncell[under, align=flushright]{%
\captionformat{#1}}}
\ImagePageTemplate{ImagePage}{%
% XXX PRECLEAR do we need clear page here???
%\clearpage%
\begin{page}%
\begin{pagecell*}%
\begin{minipage}[t][\cellheight][c]{\cellwidth}%
\vspace{\imageblockoffsettop\pagetextheight}%
\begin{center}%
\begin{inlinecell*}%
{\imageblockwidth\pagetextwidth}%
{\imageblockheight\pagetextheight}%
\imagecell[fit,
scale=\imagescale,
%captionclearparent=\captionclearpage,
#1]{#2}{#3}%
\end{inlinecell*}%
\end{center}%
\end{minipage}%
\end{pagecell*}%
\end{page}}
%% \DescribeMacro{\ImagePageClear\{..\}}
%% \DescribeMacro{\ImagePageClearCaption\{..\}}
%% \DescribeMacro{\resetImagePageClearCaption}
%% \DescribeMacro{\ImagePageClear*\{..\}}
%
%% >> \ImagePageClear[<options>]{<caption>}{<image>}
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% \clearimage \clearimage
%% v v
%% +-----------------+ +-----------------+ < \clearimage
%% | | | +-----------+ |
%% |+---------------+| | | . . | |
%% || . . || | | . . | |
%% || . . || | | . . | |
%% || image || | | image | |
%% || . . || | | . . | |
%% || . . || | | . . | |
%% |+---------------+| | | . . | |
%% | c | | +-----------+ |
%% +-----------------+ +-----------------+ < \clearimage
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Default image clearance is set by |\clearimage| global length.
%%
%% This respects |\bindingoffset|.
%%
% XXX make captions adaptive???
\ResettableMacro{ImagePageClearCaption}[1]{%
\captioncell[under, align=flushright]{%
\captionformat{#1}}}
\ImagePageTemplate{ImagePageClear}{%
% XXX PRECLEAR do we need clear page here???
%\clearpage%
\begin{page}%
% NOTE: this accounts for \bindingoffset...
\begin{pagecell*}%
\imagecell[%
center,
clearance=\clearimage,
scale=\imagescale,
offsettop=\imageoffsettop,
offsetleft=\imageoffsetleft,
captionclearparent=\captionclearpage,
#1]{#2}{#3}%
\end{pagecell*}%
\end{page}}
%% \DescribeMacro{\ImagePageClear<D>\{..\}}
%% \DescribeMacro{\ImagePageClear<D>Caption\{..\}}
%% \DescribeMacro{\resetImagePageClear<D>Caption}
%% \DescribeMacro{\ImagePageClear<D>*\{..\}}
%
%% |<D>| can be one of T, B, L or R, for top, bottom, left and right
%% respectively.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% +-----------------+ +-----------------+
%% | +-------------+ | | |
%% | | . . | | | c |
%% | | . . | | | +-------------+ |
%% | | image | | | | . . | |
%% | | . (T) . | | | | . . | |
%% | | . . | | | | image | |
%% | +-------------+ | | | . (B) . | |
%% | c | | | . . | |
%% | | | +-------------+ |
%% +-----------------+ +-----------------+
%%
%% +-----------------+ +-----------------+
%% | +---------+ | | +---------+ |
%% | |. .| | | |. .| |
%% | | . . | | | | . . | |
%% | | . . | | | | . . | |
%% | | image | | | | image | |
%% | | .(L). | | | | .(R). | |
%% | | . . | | | | . . | |
%% | |. .| | | |. .| |
%% | +---------+ c | | c +---------+ |
%% +-----------------+ +-----------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
% XXX TEST...
\ResettableMacro{ImagePageClearTCaption}[1]{%
\captioncell[under]{%
\captionformat{#1}}}
% XXX the image seems to be a line too low...
\ImagePageTemplate{ImagePageClearT}{%
\ImagePageClear*[%
top,
#1]{#2}{#3}}
\ResettableMacro{ImagePageClearBCaption}[1]{%
\captioncell[over]{%
\captionformat{#1}}}
\ImagePageTemplate{ImagePageClearB}{%
\ImagePageClear*[%
bottom,
#1]{#2}{#3}}
\ResettableMacro{ImagePageClearLCaption}[1]{%
\captionblockcell[right, clearance=\captionclearpage]{%
\captionformat{#1}}}
\ImagePageTemplate{ImagePageClearL}{%
\ImagePageClear*[%
left,
#1]{#2}{#3}}
\ResettableMacro{ImagePageClearRCaption}[1]{%
\captionblockcell[left, clearance=\captionclearpage]{%
\captionformat{#1}}}
\ImagePageTemplate{ImagePageClearR}{%
\ImagePageClear*[%
right,
#1]{#2}{#3}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Partial bleed
%% \DescribeMacro{\ImagePageFit\{..\}}
%% \DescribeMacro{\ImagePageFitCaption\{..\}}
%% \DescribeMacro{\resetImagePageFitCaption}
%% \DescribeMacro{\ImagePageFit*\{..\}}
%
%% Fit image into page...
%
%% >> \ImagePageFit[<options>]{<caption>}{<image>}
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% . . . . . . .
%% +-----------------+ +-----------------+
%% | | | |. .| |
%% . +-----------------+ . | | . . | |
%% . | . . | . | | . . | |
%% . | . . | . | | . . | |
%% . | image | . | | image | |
%% . | . . | . | | . . | |
%% . | . . | . | | . . | |
%% . +-----------------+ . | | . . | |
%% | c | | |. c.| |
%% +-----------------+ +-----------------+
%% . . . . . . .
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Default image clearance is set by |\bleed| global length.
%%
%% If centered image fits vertically this will account for |\bindingoffset|.
%%
% XXX make captions adaptive???
\ResettableMacro{ImagePageFitCaption}[1]{%
\captioncell[under, align=flushright]{%
\captionformat{#1}}}
\newif\ifphotobook@ImagePageFit@centered
\photobook@ImagePageFit@centeredfalse
\newlength\photobook@ImagePageFit@imgratio
\newlength\photobook@ImagePageFit@cellratio
\def\photobook@ImagePageFit@opt{}
\def\photobook@ImagePageFit@args{}
\ImagePageTemplate{ImagePageFit}{%
\begingroup%
% see if default alignment is overridden...
\setsepchar{,}%
\ignoreemptyitems%
\readlist*\photobook@ImagePageFit@args{moo, #1}%
\foreachitem\photobook@ImagePageFit@opt\in\photobook@ImagePageFit@args{%
\ifthenelse{\equal{\photobook@ImagePageFit@opt}{fill}}{%
\photobook@ImagePageFit@centeredtrue}{}%
\ifthenelse{\equal{\photobook@ImagePageFit@opt}{inner}}{%
\photobook@ImagePageFit@centeredtrue}{}%
\ifthenelse{\equal{\photobook@ImagePageFit@opt}{outer}}{%
\photobook@ImagePageFit@centeredtrue}{}%
\ifthenelse{\equal{\photobook@ImagePageFit@opt}{top}}{%
\photobook@ImagePageFit@centeredtrue}{}%
\ifthenelse{\equal{\photobook@ImagePageFit@opt}{left}}{%
\photobook@ImagePageFit@centeredtrue}{}%
\ifthenelse{\equal{\photobook@ImagePageFit@opt}{bottom}}{%
\photobook@ImagePageFit@centeredtrue}{}%
\ifthenelse{\equal{\photobook@ImagePageFit@opt}{right}}{%
\photobook@ImagePageFit@centeredtrue}{}}%
% align center -> check if image fits vertically...
\ifphotobook@ImagePageFit@centered\else%
\sbox{\photobook@imagebox}{\includegraphics{#3}}%
\setlength\photobook@ImagePageFit@imgratio{%
1pt * \ratio{\wd\photobook@imagebox}{\ht\photobook@imagebox}}%
% NOTE: subtracting \bindingoffset from \cellwidth here makes sure that
% we avoid offsetting images close enough in ratio to the page and
% messing up bleeds...
\setlength\photobook@ImagePageFit@cellratio{%
1pt * \ratio{\cellwidth - \bindingoffset}{\cellheight}}%
\ifdim \photobook@ImagePageFit@imgratio > \photobook@ImagePageFit@cellratio%
\photobook@ImagePageFit@centeredtrue\fi\fi%
%
% ignore \bindingoffset -> center the image...
\ifphotobook@ImagePageFit@centered%
% XXX PRECLEAR do we need clear page here???
%\clearpage%
\begin{page}%
% NOTE: this does not account for \bindingoffset...
\begin{pagecell}%
\imagecell[%
center,
clearance=-\bleed,
scale=\imagescale,
offsettop=\imageoffsettop,
offsetleft=\imageoffsetleft,
captionclearparent=\captionclearpage,
#1]{#2}{#3}%
\end{pagecell}%
\end{page}%
% special case: centered vertical image -> account for \bindingoffset...
\else%
\ImagePageClear*[%
clearance=-\bleed,
#1]{#2}{#3}\fi%
\endgroup}
%% \DescribeMacro{\ImagePageFit<D>\{..\}}
%% \DescribeMacro{\ImagePageFit<D>Caption\{..\}}
%% \DescribeMacro{\resetImagePageFit<D>Caption}
%% \DescribeMacro{\ImagePageFit<D>*\{..\}}
%
%% |<D>| can be one of T, B, L or R, for top, bottom, left and right
%% respectively.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% . . . . . . . . . . . .
%% . +-----------------+ . +-----------------+
%% . | . . | . | |
%% . | . . | . | |
%% . | image | . | |
%% . | . (T) . | . . |-----------------| .
%% . | . . | . . | . . | .
%% . |-----------------| . . | . . | .
%% | | . | image | .
%% | | . | . (B) . | .
%% | | . | . . | .
%% +-----------------+ . +-----------------+ .
%% . . . . . . . . . . . .
%%
%% . . . . . . . . . . . . . . . .
%% . +-----------------+ +-----------------+ .
%% . |. .| | | |. .| .
%% . | . . | | | | . . | .
%% . | . . | | | | . . | .
%% . | . . | | | | . . | .
%% . | image | | | | image | .
%% . | .(L). | | | | .(R). | .
%% . | . . | | | | . . | .
%% . | . . | | | | . . | .
%% . |. .| c | | c |. .| .
%% . +-----------------+ +-----------------+ .
%% . . . . . . . . . . . . . . . .
%%
%% \end{verbatim}
%% \end{minipage}
%%
\ResettableMacro{ImagePageFitTCaption}[1]{%
\captioncell[under]{%
\captionformat{#1}}}
\ImagePageTemplate{ImagePageFitT}{%
\ImagePageFit*[%
top,
#1]{#2}{#3}}
\ResettableMacro{ImagePageFitBCaption}[1]{%
\captioncell[over]{%
\captionformat{#1}}}
% XXX the image seems a bit too low...
\ImagePageTemplate{ImagePageFitB}{%
\ImagePageFit*[%
bottom,
#1]{#2}{#3}}
\ResettableMacro{ImagePageFitLCaption}[1]{%
\captionblockcell[right, clearance=\captionclearpage]{%
\captionformat{#1}}}
\ImagePageTemplate{ImagePageFitL}{%
\ImagePageFit*[%
left,
#1]{#2}{#3}}
\ResettableMacro{ImagePageFitRCaption}[1]{%
\captionblockcell[left, clearance=\captionclearpage]{%
\captionformat{#1}}}
\ImagePageTemplate{ImagePageFitR}{%
\ImagePageFit*[%
right,
#1]{#2}{#3}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Full bleed
%% \DescribeMacro{\ImagePageFill\{..\}}
%% \DescribeMacro{\ImagePageFillCaption\{..\}}
%% \DescribeMacro{\resetImagePageFillCaption}
%% \DescribeMacro{\ImagePageFill*\{..\}}
%
%% Like |\ImagePage| but will fill page with image.
%
%% >> \ImagePageFill[<options>]{<caption>}{<image>}
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% . . . . . . . . . . . . . . . . . . .
%% . . +-----------------+ . .
%% . . | c | . .
%% . .| |. .
%% . | . . | .
%% . | . . | .
%% . | image | .
%% . | . . | .
%% . | . . | .
%% . .| |. .
%% . . | | . .
%% . . +-----------------+ . .
%% . . . . . . . . . . . . . . . . . . .
%%
%% \end{verbatim}
%% \end{minipage}
%%
%% Default image clearance is set by |\bleed| global length.
%%
\ResettableMacro{ImagePageFillCaption}[1]{%
\captioncell[top, align=flushright]{%
\captionformat{#1}}}
\ImagePageTemplate{ImagePageFill}{%
\ImagePageFit*[%
fill,
#1]{#2}{#3}}
%% \DescribeMacro{\ImageHalfPageL\{..\}}
%% \DescribeMacro{\ImageHalfPageLCaption\{..\}}
%% \DescribeMacro{\resetImageHalfPageLCaption}
%% \DescribeMacro{\ImageHalfPageL*\{..\}}
%
%% Left half of image filling page with full bleed.
%
%% >> \imageleftspreadfullbleed[<vertical-offset>]{<caption>}{<image>}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% . . . . . . . . . . . . .
%% . +-----------------=
%% . | . =
%% . | . =
%% . | . =
%% . | . =
%% . | image
%% . | . =
%% . | . =
%% . | . =
%% . | . c =
%% . +-----------------=
%% . . . . . . . . . . . . .
%%
%% \end{verbatim}
%% \end{minipage}
%%
% XXX TEST...
% XXX do a better default...
\ResettableMacro{ImageHalfPageLCaption}[1]{%
\captioncell[bottom, align=flushright]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageHalfPageL}{%
\begin{spreadtopages*}[2]{photobook@ImageHalfPageL@cell}%
\imagecell[%
fill,
clearance=-\bleed,
scale=\imagescale,
offsettop=\imageoffsettop,
offsetleft=\imageoffsetleft,
captionclearparent=\captionclearpage,
#1]{#2}{#3}%
\end{spreadtopages*}%
%
% XXX PRECLEAR do we need clear page here???
%\clearpage%
\usespreadpage[1]{photobook@ImageHalfPageL@cell}}
%% \DescribeMacro{\ImageHalfPageR\{..\}}
%% \DescribeMacro{\ImageHalfPageRCaption\{..\}}
%% \DescribeMacro{\resetImageHalfPageRCaption}
%% \DescribeMacro{\ImageHalfPageR*\{..\}}
%
%% Right half of image filling page with full bleed.
%
%% >> \imagerightspreadfullbleed[<vertical-offset>]{<caption>}{<image>}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% . . . . . . . . . . . . .
%% =-----------------+ .
%% = . | .
%% = . | .
%% = . | .
%% = . | .
%% image | .
%% = . | .
%% = . | .
%% = . | .
%% = . c | .
%% =-----------------+ .
%% . . . . . . . . . . . . .
%%
%% \end{verbatim}
%% \end{minipage}
%%
% XXX TEST...
% XXX do a better default...
\ResettableMacro{ImageHalfPageRCaption}[1]{%
\captioncell[bottom, align=flushright]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageHalfPageR}{%
\begin{spreadtopages*}[2]{photobook@ImageHalfPageR@cell}%
\imagecell[%
fill,
clearance=-\bleed,
scale=\imagescale,
offsettop=\imageoffsettop,
offsetleft=\imageoffsetleft,
captionclearparent=\captionclearpage,
#1]{#2}{#3}%
\end{spreadtopages*}%
%
% XXX PRECLEAR do we need clear page here???
%\clearpage%
\usespreadpage[2]{photobook@ImageHalfPageR@cell}}
%----------------------------------------------------------------------
%%%% Spread Templates
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% No bleed
% XXX TEST!!
% XXX doc...
% XXX Should we make this just like with pages, i.e. \imagePage{..} and
% \ImagePageFit{..}, the first places relative to text and raises
% slightly while the second simply centers...
%% \DescribeMacro{\ImageSpread\{..\}}
%% \DescribeMacro{\ImageSpreadCaption\{..\}}
%% \DescribeMacro{\resetImageSpreadCaption}
%% \DescribeMacro{\ImageSpread*\{..\}}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% +---------------=---------------+
%% | +-------------=-------------+ |
%% | | . = . | |
%% | | . = . | |
%% | | . = . | |
%% | | image | |
%% | | . = . | |
%% | | . = . | |
%% | | . = . | |
%% | +-------------=-------------+ |
%% +---------------=---------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
% XXX do a better default...
% ...adaptive???
\ResettableMacro{ImageSpreadCaption}[1]{%
\captioncell[under]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpread}{%
\cleartoleftpage%
\begin{spreadtopages}[2]%
\imagecell[%
fit,
clearance=\clearimage,
scale=\imagescale,
offsettop=\imageoffsettop,
offsetleft=\imageoffsetleft,
captionclearparent=\captionclearpage,
#1]{#2}{#3}%
\end{spreadtopages}}
%% \DescribeMacro{\ImageSpread<D>\{..\}}
%% \DescribeMacro{\ImageSpread<D>Caption\{..\}}
%% \DescribeMacro{\resetImageSpread<D>Caption}
%% \DescribeMacro{\ImageSpread<D>*\{..\}}
%
%% |<D>| can be one of T, B, L or R, for top, bottom, left and right
%% respectively.
%%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% +---------------=---------------+ +---------------=---------------+
%% | +-------------=-------------+ | | = |
%% | | . = . | | | c = |
%% | | . = . | | | +-------------=-------------+ |
%% | | image | | | | . = . | |
%% | | . (T) . | | | | . = . | |
%% | | . = . | | | | image | |
%% | +-------------=-------------+ | | | . (B) . | |
%% | = c | | | . = . | |
%% | = | | +-------------=-------------+ |
%% +---------------=---------------+ +---------------=---------------+
%%
%% +---------------=---------------+ +---------------=---------------+
%% | +-------------=---------+ | | +---------=-------------+ |
%% | | . = . | | | | . = . | |
%% | | . = . | | | | . = . | |
%% | | . =. | | | | .= . | |
%% | | image | | | | image | |
%% | | . (L)=. | | | | .=(R) . | |
%% | | . = . | | | | . = . | |
%% | | . = . | | | | . = . | |
%% | +-------------=---------+ c | | c +---------=-------------+ |
%% +---------------=---------------+ +---------------=---------------+
%%
%% \end{verbatim}
%% \end{minipage}
%%
\ResettableMacro{ImageSpreadTCaption}[1]{%
\captioncell[under]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadT}{%
\ImageSpread*[%
top,
#1]{#2}{#3}}
\ResettableMacro{ImageSpreadBCaption}[1]{%
\captioncell[over]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadB}{%
\ImageSpread*[%
bottom,
#1]{#2}{#3}}
\ResettableMacro{ImageSpreadLCaption}[1]{%
\captionblockcell[right, clearance=\captionclearpage]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadL}{%
\ImageSpread*[%
left,
#1]{#2}{#3}}
\ResettableMacro{ImageSpreadRCaption}[1]{%
\captionblockcell[left, clearance=\captionclearpage]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadR}{%
\ImageSpread*[%
right,
#1]{#2}{#3}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Partial bleed
%% \DescribeMacro{\ImageSpreadFit\{..\}}
%% \DescribeMacro{\ImageSpreadFitCaption\{..\}}
%% \DescribeMacro{\resetImageSpreadFitCaption}
%% \DescribeMacro{\ImageSpreadFit*\{..\}}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% . . . . . . . . . . .
%% +---------------=---------------+ +---------------=---------------+
%% | = | | |. = .|. |
%% . |---------------=---------------| . | | . = . | |
%% . | . = . | . | | . = . | |
%% . | . = . | . | | . = . | |
%% . | image | . | | image | |
%% . | . = . | . | | . = . | |
%% . | . = . | . | | . = . | |
%% . |---------------=---------------| . | | . = . | |
%% | = c | | |. = .| c |
%% +---------------=---------------+ +---------------=---------------+
%% . . . . . . . . . . .
%%
%% \end{verbatim}
%% \end{minipage}
%%
% XXX TEST...
% XXX make caption adaptive...
\ResettableMacro{ImageSpreadFitCaption}[1]{%
\captioncell[under]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadFit}{%
\cleartoleftpage%
\begin{spreadtopages}[2]%
\imagecell[%
fit,
clearance=-\bleed,
scale=\imagescale,
offsettop=\imageoffsettop,
offsetleft=\imageoffsetleft,
captionclearparent=\captionclearpage,
#1]{#2}{#3}%
\end{spreadtopages}}
%% \DescribeMacro{\ImageSpread<D>\{..\}}
%% \DescribeMacro{\ImageSpread<D>Caption\{..\}}
%% \DescribeMacro{\resetImageSpread<D>Caption}
%% \DescribeMacro{\ImageSpread<D>*\{..\}}
%
%% Image spread aligned left (with bleed).
%
%% >> \ImageSpread<D>[<options>]{<caption>}{<image>}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% . . . . . . . . . . . . . . . . . . .
%% . +---------------=---------------+ . +---------------=---------------+
%% . | . = . | . | c = |
%% . | . = . | . . |---------------=---------------| .
%% . | . = . | . . | . = . | .
%% . | image | . . | . = . | .
%% . | . (T) . | . . | . = . | .
%% . | . = . | . . | image | .
%% . | . = . | . . | . (B) . | .
%% . |---------------=---------------| . . | . = . | .
%% | = c | . | . = . | .
%% +---------------=---------------+ . +---------------=---------------+ .
%% . . . . . . . . . . . . . . . . . . .
%%
%% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
%% . +---------------=---------------+ +---------------=---------------+ .
%% . | . = . | | | | . = . | .
%% . | . = . | | | | . = . | .
%% . | . = . | | | | . = . | .
%% . | . =. | | | | .= . | .
%% . | image | | | | image | .
%% . | . (L)=. | | | | .(R) . | .
%% . | . = . | | | | . = . | .
%% . | . = . | | | | . = . | .
%% . | . = . | c | | c | . = . | .
%% . +---------------=---------------+ +---------------=---------------+ .
%% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
%%
%% \end{verbatim}
%% \end{minipage}
%%
% XXX TEST...
% XXX do a better default...
% XXX need a caption box...
\ResettableMacro{ImageSpreadFitTCaption}[1]{%
\captioncell[under]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadFitT}{%
\ImageSpreadFit*[top, #1]{#2}{#3}}
\ResettableMacro{ImageSpreadFitBCaption}[1]{%
\captioncell[over]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadFitB}{%
\ImageSpreadFit*[bottom, #1]{#2}{#3}}
\ResettableMacro{ImageSpreadFitLCaption}[1]{%
\captionblockcell[right, clearance=\captionclearpage]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadFitL}{%
\ImageSpreadFit*[left, #1]{#2}{#3}}
\ResettableMacro{ImageSpreadFitRCaption}[1]{%
\captionblockcell[left, clearance=\captionclearpage]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadFitR}{%
\ImageSpreadFit*[right, #1]{#2}{#3}}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%%%% Full bleed
%% \DescribeMacro{\ImageSpreadFill\{..\}}
%% \DescribeMacro{\ImageSpreadFillCaption\{..\}}
%% \DescribeMacro{\resetImageSpreadFillCaption}
%% \DescribeMacro{\ImageSpreadFill*\{..\}}
%
%% Image spread with full bleed.
%
%% >> \ImageSpreadFill[<options>]{<caption>}{<image>}
%
%% \begin{minipage}{\textwidth}
%% \begin{verbatim}
%%
%% . . . . . . . . . . . . . . . . . . .
%% . +---------------=---------------+ .
%% . | . = . | .
%% . | . = . | .
%% . | . = . | .
%% . | . = . | .
%% . | image | .
%% . | . = . | .
%% . | . = . | .
%% . | . = . | .
%% . | . = . c | .
%% . +---------------=---------------+ .
%% . . . . . . . . . . . . . . . . . . .
%%
%% \end{verbatim}
%% \end{minipage}
%%
% XXX do a better default...
\ResettableMacro{ImageSpreadFillCaption}[1]{%
\captioncell[bottom, align=flushright]{%
\captionformat{#1}}}
\ImagePageTemplate{ImageSpreadFill}{%
\cleartoleftpage%
\begin{spreadtopages}[2]%
\imagecell[%
fill,
clearance=-\bleed,
scale=\imagescale,
offsettop=\imageoffsettop,
offsetleft=\imageoffsetleft,
captionclearparent=\captionclearpage,
#1]{#2}{#3}%
\end{spreadtopages}}
%----------------------------------------------------------------------
%%%% Meta Macros / Environments
%
%% These macros and environments are used internally to help define cells
%% and templates and thus can be useful when extending the functionality
%% of this class both when authoring styles and when creating user
%% macros/templates.\footnote{%
%% Note that in code the relevant meta-macros are defined in the logical
%% locations for each macro, i.e. before first use and at the start of
%% the relevant context. This section in the reference is placed near
%% the end so as to focus the user's attention on the main class interface,
%% class internal architecture and extension API being secondary.}
%%
%% \input{\jobname-meta}
%%
%%
%----------------------------------------------------------------------
%%%% Miscellaneous
%% \DescribeMacro{\PageInfo}
%
%% Display basic paper / page / cell geometry.
%%
\newcommand\PageInfo[1][mm]{%
Layout: \layoutmode
\par
paper: \lenprint[#1]{\paperwidth} x \lenprint[#1]{\paperheight} (w. bleeds) \\
block: \lenprint[#1]{\blockwidth} x \lenprint[#1]{\blockheight} \\
cell: \lenprint[#1]{\cellparentwidth} x \lenprint[#1]{\cellparentheight} \\
bleed: \lenprint[#1]{\bleed}}
%% \DescribeMacro{\GenerateTemplate\{..\}}
%
%% Generate template page for current |layoutmode|.
%
%% >> \GenerateTemplate
%
%% Cell size can be printed in |mm| (default) or in any explicit unit
%% supported by \LaTeX.
%
%% >> \GenerateTemplate{<unit>}
%
%% This can be useful if one needs to make the cover/jacket/... in either a
%% different software package or by hand.
%%
%% This is a no-op for |layoutmode=block|.
%%
% XXX should digits/rounding be configurable???
\newcommand\photobook@TemplateCell[2][mm]{
\begin{center}
\vfill%
#2 \\
(\lenprint[#1]{\cellwidth} \space x \lenprint[#1]{\cellheight})
\vfill%
\vspace{0pt}%
\end{center}%
\ignorespaces}
\newcommand\GenerateTemplate[1][mm]{
\TPoptions{showboxes=true}%
\begin{page}
\setlength{\parindent}{0em}
% NOTE: only the relevant blocks will be visible...
\ifendpaperlayout%
\begin{leftside}
\photobook@TemplateCell[#1]{ENDPAPER LEFT}
\end{leftside}
\begin{rightside}
\photobook@TemplateCell[#1]{ENDPAPER RIGHT}
\end{rightside}\fi%
\ifcoverlikelayout%
\begin{frontcover}
\photobook@TemplateCell[#1]{FRONT COVER}
\end{frontcover}
\begin{vspine}%
\photobook@TemplateCell[#1]{SPINE}%
\end{vspine}
\begin{backcover}
\photobook@TemplateCell[#1]{BACK COVER}
\end{backcover}\fi%
\ifjacketlayout%
\begin{frontflap}%
\photobook@TemplateCell[#1]{FRONT FLAP}
\end{frontflap}
\begin{backflap}%
\photobook@TemplateCell[#1]{BACK FLAP}
\end{backflap}\fi%
\end{page}}
% XXX place marks in bleed area...
% XXX do this for all pages... (???)
\newcommand\ShowMarks[1][1pt]{%
% general...
% XXX corners / cut marks...
\ifendpaperlayout%
% XXX fold...
\fi%
\ifcoverlikelayout%
% XXX spine...
% XXX folds...
\fi%
\ifjacketlayout%
% XXX spine...
% XXX folds...
\fi}
% XXX EXPERIMENTAL...
\def\photobook@pdfboxstore@stored{}
% XXX should these be stacked???
% XXX handle slot name...
\newcommand\storepdfboxes[1][stored]{%
\edef\photobook@pdfboxstore@stored{%
\photobook@pdfboxes}}
% XXX handle slot name...
\newcommand\restorepdfboxes[1][stored]{%
\expandafter\pdfpageattr\expandafter{\photobook@pdfboxstore@stored}}
%% \DescribeMacro{\pdfboxesset\{..\}}
%
%% >> \pdfboxesset[<bleed>]{<bleedblockwidth>}{<bleedblockheight>}
%%
\newcommand\pdfboxesset[3][\bleed]{%
% calculate pdf box dimensions in pt...
\edef\photobook@pdfboxesset@w{\strip@pt\dimexpr
0.996264009963\dimexpr #2 \relax\relax}%
\edef\photobook@pdfboxesset@h{\strip@pt\dimexpr
0.996264009963\dimexpr #3 \relax\relax}%
\edef\photobook@pdfboxesset@bleed{\strip@pt\dimexpr
0.996264009963\dimexpr #1 \relax\relax}%
\edef\photobook@pdfboxesset@t{\strip@pt\dimexpr
0.996264009963\dimexpr #3 - #1 \relax\relax}%
\edef\photobook@pdfboxesset@r{\strip@pt\dimexpr
0.996264009963\dimexpr #2 - #1 \relax\relax}%
%
\edef\photobook@pdfboxes{%
/MediaBox [0 0 \photobook@pdfboxesset@w\space \photobook@pdfboxesset@h]
/BleedBox [0 0 \photobook@pdfboxesset@w\space \photobook@pdfboxesset@h]
/ArtBox [
\photobook@pdfboxesset@bleed\space \photobook@pdfboxesset@bleed\space
\photobook@pdfboxesset@r\space \photobook@pdfboxesset@t]
/TrimBox [
\photobook@pdfboxesset@bleed\space \photobook@pdfboxesset@bleed\space
\photobook@pdfboxesset@r\space \photobook@pdfboxesset@t]
/CropBox [
\photobook@pdfboxesset@bleed\space \photobook@pdfboxesset@bleed\space
\photobook@pdfboxesset@r\space \photobook@pdfboxesset@t]}%
%
% set the boxes...
\ifxetex%
% XXX make this reusable -- currently this will add new boxes per
% call, need to cleanup...
\AtBeginShipout{\AtBeginShipoutAddToBox{%
\special{pdf:put @thispage << \photobook@pdfboxes >>}}}%
\else%
\expandafter\pdfpageattr\expandafter{\photobook@pdfboxes}\fi}
%% \DescribeMacro{\pdfcommentcell\{..\}}
%
%% Add pdf comment as margin overlay.
%%
%% >> \pdfcommentcell[<options>]{<comment>}
%%
% XXX BUG: this takes up space...
\newcommand\pdfcommentcell[2][]{%
\begin{cell*}{
\ifnumodd{\thepage}{%
\cellwidth - \marginparwidth - 2\bleed - 1cm
}{%
\bleed + 1cm},
\bleed + 1cm
}{\marginparwidth}{1pt}%
\pdfcomment[color=yellow, #1]{#2}%
\end{cell*}}
%% \DescribeMacro{\pdfpagecount\{..\}}
%
%% Get pdf page count
%%
%% >> \pdfpagecount{<file.pdf>}
%%
\newcommand\pdfpagecount[1]{%
\ifpdftex%
\pdfximage{#1}%
\number\pdflastximagepages%
\else\ifxetex%
\number\XeTeXpdfpagecount"#1"%
\else\ifluatex%
\number\directlua{%
local pages = 0
local doc = pdfe.open("\luaescapestring{#1}")
if doc then
pages = pdfe.getnofpages(doc)
pdfe.close(doc)
end
tex.write(pages) }\fi\fi}
%% \DescribeMacro{\pdfspinewidth\{..\}}
%
%% Calculate spine thickness
%%
%% >> \pdfspinewidth{<paper-thikness>}{<cover-thikness>}{<block-pdf>}
%%
% NOTE: really "like" how LaTeX overcomplicats simple math...
\newcommand\pdfspinewidth[3]{%
\setlength\spinewidth{\dimexpr
(#1 mm) * \numexpr \pdfpagecount{#3} / 2 \relax
+ ((#2 mm) * 2)
\relax}}
%----------------------------------------------------------------------
% Index...
%
% XXX this prints trash at this point...
% ...I do not want to build the index manually but it seems that
% we are slowly moving in that direction...
%%% \printindex
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%%% XXX DEBUG...
%%%\AtBeginDocument{
%%%}
% - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
%% \blankfootnote{%
%% Why ASCII diagrams instead of normal graphics, you might ask?
%% Well, for the same reason as photo-books in \LaTeX\ -- I liked
%% the idea of it, the simplicity, and thought that it would be fun to
%% see how far can I push things before it all falling apart on me, and...
%% We are here, at the end, and it all is still here too :)}
%----------------------------------------------------------------------
%% \end{document} % vim:set ts=4 sw=4 nowrap :
Reference in New Issue View Git Blame Copy Permalink