docs...

Signed-off-by: Alex A. Naanou <alex.nanou@gmail.com>

Makefile

@@ -139,11 +139,13 @@ clean:
 		*/traefik \
 		*/config.last-run
 
+
 .PHONY: clean-interfaces
 clean-interfaces: /etc/network/interfaces.orig
 	# NOTE: this may need 'ifreload -a' to take effect...
 	cp "$<" "$(subst .orig,,$<)"
 
+
 .PHONY: clean-all
 clean-all: clean
 	-rm -rf \

README.md

@@ -182,8 +182,11 @@ At this point WAN interface exposes two IPs:
   - ssh:22
 
 The Proxmox administrative interface is available behind the 
-[Wireguard](https://www.wireguard.com/) proxy or on the ADMIN port, both 
+[Wireguard](https://www.wireguard.com/) proxy on the WAN port or directly 
-on https://10.0.0.254:8006.
+on the ADMIN port, both on https://10.0.0.254:8006.
+
+At this point, it is recommended to check both the fail-safe `ssh` 
+connection now and the Wireguard access.
 
 Additional administrative tasks can be performed now if needed.
 
@@ -239,6 +242,108 @@ _WARNING: NEVER store any ssh keys on the `ssh` CT, use `ssh-agent` instead!_
 
 
 
+#### Recovery
+
+- Configuration or bridge failure while bootstrapping
+
+  Remove all the CT's that were created by make:
+  ```shell
+  pct destroy ID
+  ```
+
+  Cleanup the interfaces:
+  ```shell
+  make clean-interfaces
+  ```
+
+  Revise configuration if `./config.global`
+
+  Cleanup CT cached configuration:
+  ```shell
+  make clean
+  ```
+
+  Rebuild the bridges:
+  ```shell
+  make host-bootstrap
+  ```
+  And select (type "y") "Create bridges" while rejecting all other sections.
+
+  Or, do a full rebuild selecting/rejecting the appropriate sections:
+  ```shell
+  make bootstrap
+  ```
+
+
+- Failure while creating the `gate` CT
+
+  Check if the bridges are correct, and check if the host as internet access.
+
+  Remove the `gate` CT (replacing 110 if you created it with a different ID):
+  ```shell
+  pct destroy 110
+  ```
+
+  Build the bootstrapped gate:
+  ```shell
+  make gate-bootstrap
+  ```
+
+  Check if gate is accesable and if it has internet access.
+
+  Then create the base CT's:
+  ```shell
+  make ns ssh wireguard
+  ```
+
+  finally cleanup:
+  ```shell
+  make bootstrap-clean
+  ```
+
+  now the setup can be finalized (see: [Setup](#setup))
+
+
+
+- Failure while creating other CT's
+
+  Check if gate is accesable and if it has internet access, if it is not
+  then this will fail, check or rebuild the gate.
+
+  Simply remove the CT
+  ```shell
+  pct destroy ID
+  ```
+
+  Then rebuild it:
+  ```shell
+  make CT_NAME
+  ```
+
+
+
+- Full clean rebuild
+
+  Remove any of the base CT's:
+  ```shell
+  pct destroy ID
+  ```
+
+  Restore bridge configuration:
+  ```shell
+  make clean-interfaces
+  ```
+
+  Cleanup the configuration data:
+  ```shell
+  make clean-all
+  ```
+
+  Follow the instructions in [Setup](#setup)
+
+
+
+
 #### Configuration
 
 XXX