tweaks...

Signed-off-by: Alex A. Naanou <alex.nanou@gmail.com>

config.global.example

@@ -18,6 +18,15 @@
 #
 #------------------------------------------------------------------------
 
+# Bootsrap configuration...
+#
+# Usually this is the default bridge created in Proxmox, so there is no 
+# need to touch this.
+BOOTSTRAP_BRIDGE=0
+# XXX
+#BOOTSTRAP_PORT=none
+
+
 # CT interface bridge configuration.
 #
 # These are set to the bridge number (the number in 'vmbr#') used for 
@@ -34,10 +43,10 @@
 #	ADMIN_BRIDGE=3
 #	LAN_BRIDGE=10
 #
-BOOTSTRAP_BRIDGE=0
-ADMIN_BRIDGE=00
-WAN_BRIDGE=03
-LAN_BRIDGE=10
+# XXX revise numbering...
+ADMIN_BRIDGE=_admin
+WAN_BRIDGE=_wan
+LAN_BRIDGE=_lan
 
 
 # NOTE: it is simpler to statically assign these than to configure dhcp

gate-traefik/make.sh

@@ -42,14 +42,15 @@ REBOOT=${REBOOT:=1}
 # Bootstrap cleanup...
 
 if ! [ -z $BOOTSTRAP_CLEAN ] ; then
-	ID=${GATE_ID:=${DFL_ID}}
+	#ID=${ID:-${DFL_ID}}
 
 	xread "ID: " ID
+	xread "Bootstrap bridge:" BOOSTRAP_BRIDGE
 	readBridgeVars
 
 	echo "# Reverting gate's WAN bridge to: vmbr${WAN_BRIDGE}..."
 	@ sed -i \
-		-e 's/^\(net0.*vmbr\)'${ADMIN_BRIDGE}'/\1'${WAN_BRIDGE}'/' \
+		-e 's/^\(net0.*vmbr\)'${BOOSTRAP_BRIDGE}'/\1'${WAN_BRIDGE}'/' \
 		/etc/pve/lxc/${ID}.conf 
 	exit
 fi
@@ -59,8 +60,9 @@ fi
 # Bootstrap...
 
 if ! [ -z $BOOTSTRAP ] ; then
+	xread "Bootstrap bridge:" BOOSTRAP_BRIDGE
 	# this will allow the bootstrapped CTs to access the network...
-	WAN_BRIDGE=${ADMIN_BRIDGE}
+	WAN_BRIDGE=${BOOSTRAP_BRIDGE}
 fi
 
 

host/bootstrap-bridges.tpl

@@ -1,6 +1,4 @@
 
-# NOTE: this assumes the ADMIN bridge to exist (proxmox default) and to be vmbr0...
-
 auto vmbr${LAN_BRIDGE}
 iface vmbr${LAN_BRIDGE} inet manual
         bridge-ports none
@@ -15,3 +13,11 @@ iface vmbr${WAN_BRIDGE} inet manual
         bridge-fd 0
 #WAN
 
+auto vmbr${ADMIN_BRIDGE}
+iface vmbr${ADMIN_BRIDGE} inet static
+        address ${HOST_ADMIN_IP}
+        bridge-ports ${BOOTSTRAP_ADMIN_BRIDGE}
+        bridge-stp off
+        bridge-fd 0
+#ADMIN
+

host/bridges.tpl

@@ -16,9 +16,8 @@ iface vmbr${WAN_BRIDGE} inet manual
 auto vmbr${ADMIN_BRIDGE}
 iface vmbr${ADMIN_BRIDGE} inet static
         address ${HOST_ADMIN_IP}
-        #gateway ${GATE_ADMIN_IPn}
-        #bridge-ports ${ADMIN_PORT}
-        bridge-ports none 
+        gateway ${GATE_ADMIN_IPn}
+        bridge-ports ${ADMIN_PORT}
         bridge-stp off
         bridge-fd 0
 #ADMIN

host/make.sh

@@ -48,6 +48,7 @@ BRIDGES_TPL=bridges.tpl
 
 if ! [ -z $BOOTSTRAP_CLEAN ] ; then
 	# XXX switch admin interface IP and Gateway to admin net...
+	# 		
 	# 		update ADMIN_BRIDGE:
 	# 			- set gateway
 	# 			- set bridge port to admin port
@@ -59,10 +60,12 @@ fi
 # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 # Bootstrap...
 
+# XXX
 if ! [ -z $BOOTSTRAP ] ; then
-	# XXX
-	#BRIDGES_TPL=bootstrap-bridges.tpl
-	true
+	DFL_BOOTSTRAP_ADMIN_PORT=${DFL_BOOTSTRAP_ADMIN_PORT:-none}
+	xread "Bootstrap port: " BOOTSTRAP_ADMIN_PORT
+
+	BRIDGES_TPL=bootstrap-bridges.tpl
 fi
 
 
@@ -122,7 +125,7 @@ if xreadYes "# Create bridges?" BRIDGES ; then
 		cat "$BRIDGES_TPL" \
 			| expandPCTTemplate \
 				LAN_BRIDGE WAN_BRIDGE ADMIN_BRIDGE \
-				WAN_PORT ADMIN_PORT \
+				WAN_PORT ADMIN_PORT BOOTSTRAP_ADMIN_PORT \
 				HOST_ADMIN_IP GATE_ADMIN_IP)"
 
 	if [ -z "$DRY_RUN" ] ; then