experimenting...

Signed-off-by: Alex A. Naanou <alex.nanou@gmail.com>

config.global.example

@@ -36,6 +36,8 @@ ADMIN_BRIDGE=
 DFL_WAN_IP=192.168.1.101/24
 DFL_WAN_GATE=192.168.1.252
 
+DFL_WAN_SSH_IP:192.168.1.102/24
+
 
 # Doman and email configuration
 #

host/templates/pve/etc/firewall/cluster.fw

@@ -7,7 +7,7 @@ enable: 1
 
 [RULES]
 
-IN ACCEPT -i vmbr3 -log nolog # STUB
+IN ACCEPT -i vmbr3 -log nolog # ADMIN
 IN REJECT -i vmbr0 -p udp -dport 68 -sport 68 -log nolog # dhcp
 IN REJECT -i vmbr0 -p udp -dport 67 -sport 67 -log nolog # dhcp
 OUT REJECT -i vmbr0 -p udp -dport 68 -sport 68 -log nolog # dhcp
@@ -17,6 +17,8 @@ OUT DHCPfwd(REJECT) -i vmbr0 -log nolog
 IN DNS(ACCEPT) -i vmbr0 -log nolog
 IN Ping(ACCEPT) -i vmbr0 -log nolog
 IN SSH(ACCEPT) -i vmbr0 -log nolog
+IN ACCEPT -i vmbr0 -p udp -dport 51820 -log nolog # Wireguard
+IN ACCEPT -i vmbr0 -p udp -dport 51821 -log nolog # Wireguard (alt)
 |IN OpenVPN(ACCEPT) -i vmbr0 -log nolog
 IN Web(ACCEPT) -i vmbr0 -log nolog
 IN ACCEPT -i vmbr0 -p udp -dport 22027 -log nolog # syncthing

ssh/make.sh

@@ -34,6 +34,9 @@ LAN_GATE=SKIP
 
 REBOOT=${REBOOT:=1}
 
+DFL_WAN_SSH_IP=${DFL_WAN_SSH_IP:=}
+xread "WAN ssh ip:" WAN_SSH_IP
+
 readVars
 
 
@@ -47,6 +50,7 @@ OPTS_STAGE_1="\
 	--swap $SWAP \
 	--net0 name=lan,bridge=vmbr${LAN_BRIDGE},firewall=1,ip=dhcp,type=veth \
 	--net1 name=admin,bridge=vmbr${ADMIN_BRIDGE},firewall=1,ip=dhcp,type=veth \
+	--net2 name=wan,bridge=vmbr${WAN_BRIDGE},firewall=1${WAN_SSH_IP:+,ip=${WAN_SSH_IP}},type=veth \
 	--storage local-lvm \
 	--rootfs local-lvm:$DRIVE \
 	--unprivileged 1 \

wireguard/make.sh

@@ -52,13 +52,16 @@ xread "Wireguard endpoint port: " ENDPOINT_PORT
 CLIENT_IPS=${CLIENT_IPS:-10.42.0.0/16}
 ALLOWED_IPS=${ALLOWED_IPS:-0.0.0.0/0,${CLIENT_IPS}}
 
+DNS=${DNS:-${NS_LAN_IP:-${DFL_NS_LAN_IP}}}
+DNS=${DNS/\/*}
+xread "Local network DNS:" DNS
+
 xreadYes "Show profile as QRcode when done?" QRCODE
+QRCODE=${QRCODE:-0}
 
 readVars
 
 
-DNS=${NS_LAN_IP/\/*}
-
 
 
 #----------------------------------------------------------------------
@@ -103,19 +106,10 @@ echo "# Copying assets..."
 echo "# Setup: wireguard default profile..."
 @ lxc-attach $ID -- bash -c "cd /root \
 	&& QRCODE=${QRCODE} make default.client" 
-@ lxc-attach $ID -- chmod 600 /etc/wireguard/wg0.conf
 
 echo "# client config:"
 @ mkdir -p clients
 @ pct pull $ID /etc/wireguard/clients/default.conf clients/default.conf
-# show the profile as a qrcode...
-#if [ "$QRCODE" ] ; then
-#	echo "# default profile:"
-#	@ lxc-attach $ID -- qrencode -t UTF8 -r /etc/wireguard/clients/default.conf
-#fi
-
-#echo "# Setup: bridge device..."
-@ lxc-attach $ID wg-quick up wg0 
 
 echo "# Post config..."
 pctSet $ID "${OPTS_STAGE_2}" $REBOOT

wireguard/templates/root/Makefile

@@ -1,10 +1,10 @@
 
-
+INTERFACE := wg0
 
 SERVER_DIR := /etc/wireguard/
-SERVER_TPL := templates/wg0.conf
-SERVER_CLIENT_TPL := templates/wg0-client.tpl
-SERVER_CONF := $(SERVER_DIR)/wg0.conf
+SERVER_TPL := templates/server.conf
+SERVER_CLIENT_TPL := templates/client.tpl
+SERVER_CONF := $(SERVER_DIR)/$(INTERFACE).conf
 SERVER_KEY := $(SERVER_DIR)/server_id
 SERVER_PUBLIC_KEY := $(SERVER_DIR)/server_id.pub
 
@@ -26,6 +26,7 @@ ALLOWED_IPS ?= ${ALLOWED_IPS}
 	wg genkey 2> /dev/null > $@
 	chmod 600 $@
 
+
 %_id.pub: %_id
 	cat $< | wg pubkey > $@
 
@@ -39,6 +40,9 @@ $(SERVER_CONF): $(SERVER_TPL) $(SERVER_KEY)
 			-e 's/\$${\CLIENT_IPS}/$(subst /,\/,$(CLIENT_IPS))/g' \
 			-e 's/\$${\SERVER_PRIVATE_KEY}/'$$(sed -e 's/\//\\\//g' "$(SERVER_KEY)")'/g' \
 		> "$@"
+	chmod 600 $@
+	wg-quick up $(INTERFACE) 
+
 
 # XXX need to figure out a way to link this to the .config file without 
 # 	conflicting with the server's wg0.conf
@@ -64,15 +68,19 @@ $(SERVER_CONF): $(SERVER_TPL) $(SERVER_KEY)
 			-e 's/\$${\CLIENT_PUBLIC_KEY}/'$$(sed -e 's/\//\\\//g' "$(CLIENT_DIR)/$*_id.pub")'/g' \
 			-e 's/\$${\SERVER_PUBLIC_KEY}/'$$(sed -e 's/\//\\\//g' "$(SERVER_PUBLIC_KEY)")'/g' \
 		>> "$(SERVER_CONF)"
-	@ [ -z "$$QRCODE" ] \
-		|| ( echo "# Profile: $*" \
+	make update $*.show
+
+
+%.show: $(CLIENT_DIR)/%.conf
+	@ [ "$(QRCODE)" == "1" ] \
+		&& ( echo "# Profile: $*" \
 			&& qrencode -t UTF8 -r "$(CLIENT_DIR)/$*.conf" )
+	@ cat "$(CLIENT_DIR)/$*.conf"
+	@ echo 
 
 
-
-%.qr: %.client
-	@ ( echo "# Profile: $*" \
-		&& qrencode -t UTF8 -r "$*.conf" )
+update:
+	wg syncconf $(INTERFACE) <(wg-quick strip $(INTERFACE))
 
 
 server: $(SERVER_CONF)