.pct-helpers

@@ -302,81 +302,33 @@ xreadpass(){
 }
 
 
-# Like cat but a prettier...
-#
-#	listFile PATH
-#
-listFile(){
-	if [ -e "$1" ] ; then
-		echo "--- $1 ---"
-		cat "$1"
-		echo '---'
-	else
-		echo "$FUNCNAME: $1: No such file or directory."
-		return 1
-	fi
-}
-
-
 # Review changes in PATH.new, then edit/apply changes to PATH
 #
-#	reviewApplyChanges PATH [apply|edit|skip]
+#	reviewApplyChanges PATH
-#
 #
 # NOTE: if changes are not applied this will return non-zero making this 
 #		usable in conditionals...
 reviewApplyChanges(){
 	local file=$1
-	if ! [ -e "$file".new ] ; then
-		echo "$FUNCNAME: $1: No such file or directory."
-		return 1
-	fi
-
-	# default option...
-	local dfl=
-	local a=a
-	local e=e
-	local s=s
-	case "${2,,}" in
-		a|apply)
-			a=A
-			dfl=a
-			;;
-		e|edit)
-			e=E
-			dfl=e
-			;;
-		s|skip)
-			s=S
-			dfl=s
-			;;
-	esac
-
 	echo "# Review updated: ${file}.new:"
-	listFile ${file}.new
+	@ cat ${file}.new
+	echo '---'
 	local res
 	while true ; do
-		read -ep "# [$a]pply, [$e]dit, [$s]kip? " res
+		read -ep "# [a]pply, [e]dit, [s]kip? " res
-		if [ -z $res ] ; then
-			if [ -z $dfl ] ; then
-				continue
-			fi
-			res=$dfl
-		fi
 		case "${res,,}" in
 			a|apply)
 				break
 				;;
 			e|edit)
 				${EDITOR} "${file}.new"
-				listFile ${file}.new
 				;;
 			s|skip)
-				echo "# Changes kept as: ${file}.new"
+				echo "# file saved as: ${file}.new"
 				return 1
 				;;
 			*)
-				echo "ERROR: Unknown command: \"$res\"" >&2
+				echo "ERROR: unknown command: \"$res\"" >&2
 				continue
 				;;
 		esac

Makefile

@@ -10,7 +10,7 @@
 #
 #----------------------------------------------------------------------
 
-EDITOR ?= nano
+EDITOR ?= vim
 
 
 # CTs...
@@ -94,10 +94,7 @@ bootstrap-clean: host-bootstrap-clean
 
 # Finalize: reconect admin port/bridge correctly...
 .PHONY: finalize
-finalize: gate-bootstrap-clean
+finalize: bootstrap-clean gate-bootstrap-clean 
-	# cleanup: stage 1...
-	make host-bootstrap-clean
-	# cleanup: stage 2...
 	make host-bootstrap-clean
 
 

README.md

@@ -3,20 +3,18 @@
 A set of scripts for automating setup and tasks in proxmox.
 
 ## TODO
-- CT updates
+- revise defaults
-- backup/restore
-- mail
-- which is better?
-  - Makefile (a-la ./wireguard/templates/root/Makefile)
-  - shell (a-la ./shadow/templates/root/update-shadowsocks.sh)
 - separate templates/assets into distribution and user directories
   ...this is needed to allow the user to change the configs without the 
   fear of them being overwritten by git (similar to how config is handlerd)
-
+- might be a good idea to export a specific ct script that can be used 
-
+  for updates for that ct
-<!-- START doctoc -->
+- which is better?
-<!-- END doctoc -->
+  - Makefile (a-la wireguard)
-
+  - shell (a-la shadow)
+- ct updates
+- backup/restore
+- mail
 
 
 ## Motivation
@@ -118,9 +116,6 @@ Three ways of access to the ADMIN network are provided:
 
 Install Proxmox and connect it to your device/network.
 
-Proxmox will need to have access to the internet to download assets and 
-updates.
-
 
 #### Notes
 
@@ -137,13 +132,6 @@ This setup will use three IP addresses:
 
 ### Semi-automated setup
 
-Open a terminal on the host (`ssh` or via the UI).
-
-Optionally, set a desired default editor via:
-```shell
-export EDITOR=nano
-```
-
 Download the [`bootstrap.sh`](./scripts/bootstrap.sh) script and execute it:
 ```shell
 curl 'https://raw.githubusercontent.com/flynx/proxmox-utils/refs/heads/master/scripts/bootstrap.sh' | sudo bash
@@ -174,69 +162,22 @@ make finalize
 ```
 
 This will
-- Setup firewall rules.  
+- detach the host from any external ports and make it accessible only 
-  Note that the firewall will not be enabled, this should be done manually
-  after rule review.
-- Detach the host from any external ports and make it accessible only 
   from the internal network.  
   See: [Architecture](#architecture) and [Bootstrapping](#bootstrapping)
+- setup firewall rules.  
+  Note that the firewall will not be enabled, this should be done manually
+  after rule review.
+  
 
-This will break the ssh connection when done, reconnect via the WAN port 
+*Note that the ADMIN port is configured for direct connections only (DHCP), 
-to continue (see: [Accessing the host](#accessing-the-host)), or connect 
+connecting it to a configured network can lead to unexpected behavior.*
-directly to the ADMIN port (DHCP) and ssh into `$HOST_ADMIN_IP` (default: 10.0.0.254).
-
-
-_Note that the ADMIN port is configured for direct connections only (DHCP), 
-connecting it to a configured network can lead to unexpected behavior._
-
 
 
 #### Accessing the host
 
-The simplest way is to connect to `wireguard` VPN and open http://pve.adm:8006 
-in a browser (a profile was created during the setup process and stored 
-in the `/root/clients/` directory on the `wireguard` CT).
-
-The second approach is to `ssh` to either:
-
-```shell
-ssh -p 23 <user>@<WAN_IP>
-```
-
-or:
-```shell
-ssh <user>@<WAN_SSH_IP>
-```
-
-The later will also work if the `gate` CT is down or not accessible.
-
-
-And from the `ssh` CT:
-```shell
-ssh root@pve
-```
-
-_WARNING: NEVER store any ssh keys on the `ssh` CT, use `ssh-agent` instead!_
-
-
-
-#### Configuration
-
 XXX
 
-The following CT's interfaces can not be configured in the Proxmox UI:
-- `gate`
-- `ns`
-- `nextcloud`
-- `wireguard`
-
-This is done mostly to keep Proxmox from touching the `hostname $(hostname)`
-directive (used by the DNS server to assigned predefined IP's) and in 
-the case of `gate` and `wireguard` to keep it from touching the additional 
-bridges or interfaces defined.  
-(XXX this restriction may be lifted in the future)
-
-
 
 #### Setup additional services
 
@@ -271,8 +212,6 @@ XXX traefik rules
 
 
 
-
-
 ### Manual setup
 
 

config.global.example

@@ -1,4 +1,4 @@
-#----------------------------------------------------------------------
+#------------------------------------------------------------------------
 #
 # Global config file
 #
@@ -16,68 +16,7 @@
 # It is not recomended to set passwords here or in other config files.
 #
 #
-#----------------------------------------------------------------------
+#------------------------------------------------------------------------
-# These options need to be revised or changed... 
-# (remove "DFL_" prefix to disable promting)
-#
-
-# Domain and email configuration
-#
-DFL_DOMAIN=example.com
-DFL_EMAIL=user@example.com
-
-
-# Network configuration...
-#
-# NOTE: it is simpler to statically assign these than to configure DHCP
-# 	plus port forewarding to the dynamically assigned IP.
-# NOTE: if installing on a different network than the target, these can 
-# 	be changed for target deployment in:
-# 	- gate CT's /etc/network/interfaces (NOT in the Proxmox UI)
-# 	- ssh CT's network configuration (Proxmox UI)
-DFL_WAN_IP=192.168.1.101/24
-DFL_WAN_GATE=192.168.1.252
-
-# IP used for fail-safe conection to the ADMIN network
-DFL_WAN_SSH_IP=192.168.1.102/24
-
-
-# Web app/service domain configuration
-#
-# Here two optional variables are provided per service:
-# - <SERVICE>_DOMAIN=...
-# 	Overrides the $DOMAIN option above for <SERVICE>
-# - <SERVICE>_SUBDOMAIN=...
-# 	Sets the subdomain of $DOMAIN (or $<SERVICE>_DOMAIN) for <SERVICE>
-
-# Nextcloud
-#NEXTCLOUD_DOMAIN=
-NEXTCLOUD_SUBDOMAIN=nc.
-
-# Gitea
-#GITEA_DOMAIN=
-#GITEA_SUBDOMAIN=git.
-
-
-# Extra options passed to each CT when created.
-#
-# This can be used for passing in ssh keys, etc...
-#
-# see: 
-# 	man pct
-#
-# Example:
-# 	DFL_PCT_EXTRA="--ssh-public-keys /path/to/autohrized_keys"
-#
-DFL_PCT_EXTRA=SKIP
-
-
-
-#----------------------------------------------------------------------
-#
-# Options afetr this point are sane defaults and in the general case 
-# can be left as-is.
-#
 
 # Bootsrap configuration...
 #
@@ -98,21 +37,70 @@ BOOTSTRAP_BRIDGE=0
 # 	bridges with numbers greater than X (10 in the example below)
 #
 # Example:
-#	ADMIN_BRIDGE=_admin
+# 	WAN_BRIDGE=0
-# 	WAN_BRIDGE=_wan
+#	ADMIN_BRIDGE=3
-#	LAN_BRIDGE=_lan
+#	LAN_BRIDGE=10
 #
 ADMIN_BRIDGE=_admin
 WAN_BRIDGE=_wan
 LAN_BRIDGE=_lan
 
 
-# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+# NOTE: it is simpler to statically assign these than to configure dhcp
+# 	plus port forewarding to the dynamically assigned IP.
+DFL_WAN_IP=192.168.1.101/24
+DFL_WAN_GATE=192.168.1.252
+
+DFL_WAN_SSH_IP=192.168.1.102/24
+
+
+# Domain and email configuration
+#
+DOMAIN=example.com
+EMAIL=user@example.com
+
+
+# Web app/service domain configuration
+#
+# Here two optional variables are provided per service:
+# - <SERVICE>_DOMAIN=...
+# 	Overrides the $DOMAIN option above for <SERVICE>
+# - <SERVICE>_SUBDOMAIN=...
+# 	Sets the subdomain of $DOMAIN (or $<SERVICE>_DOMAIN) for <SERVICE>
+#
+
+# Nextcloud
+#NEXTCLOUD_DOMAIN=
+NEXTCLOUD_SUBDOMAIN=nc.
+
+# Gitea
+#GITEA_DOMAIN=
+#GITEA_SUBDOMAIN=git.
+
+
+# Extra options passed to each CT created.
+#
+# This can be used for passing in ssh keys, etc...
+#
+# see: 
+# 	man pct
+#
+# Example:
+# 	DFL_PCT_EXTRA="--ssh-public-keys /path/to/autohrized_keys"
+#
+DFL_PCT_EXTRA=SKIP
+
+
+
+#------------------------------------------------------------------------
+#
+# Options afetr this point are sane defaults and in the general case 
+# can be left as-is.
+#
 
 # host
 HOST_ADMIN_IP=10.0.0.254/24
 
-
 # Nameserver
 NS_HOSTNAME=ns
 NS_ID=100
@@ -122,7 +110,6 @@ NS_LAN_IP=10.1.1.1/24
 RESERVE_NS_ID=101
 TEMPLATE_NS_ID=200
 
-
 # Gateway / Reverse proxy
 GATE_HOSTNAME=gate
 GATE_ID=110
@@ -133,5 +120,4 @@ RESERVE_GATE_ID=111
 TEMPLATE_GATE_ID=210
 
 
-
+#------------------------------------------------------------------------
-#----------------------------------------------------------------------

gate-traefik/make.sh

@@ -25,8 +25,8 @@ RAM=128
 SWAP=$RAM
 DRIVE=0.5
 
-#DFL_WAN_IP=${DFL_WAN_IP}
+DFL_WAN_IP=${DFL_WAN_IP}
-#DFL_WAN_GATE=${DFL_WAN_GATE}
+DFL_WAN_GATE=${DFL_WAN_GATE}
 
 # XXX revise...
 DFL_ADMIN_IP=${GATE_ADMIN_IP:=${DFL_ADMIN_IP:=10.0.0.2/24}}

host/make.sh

@@ -49,23 +49,9 @@ BRIDGES_TPL=${BRIDGES_TPL:-bridges.tpl}
 # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 # Bootstrap...
 
-# cleanup...
 if ! [ -z $BOOTSTRAP_CLEAN ] ; then
 	@ cp "$INTERFACES"{,.bak}
 
-	__finalize(){
-		if reviewApplyChanges "$INTERFACES" apply ; then
-			# XXX this must be done in nohup to avoid breaking on connection lost...
-			if ! @ ifreload -a ; then
-				# reset settings back if ifreload fails...
-				@ cp "$INTERFACES"{.bak,}
-				@ ifreload -a	
-			fi
-		fi
-		# clear self to avoid a second deffered execution...
-		unset -f __finalize
-	}
-
 	# stage 1: bootstrap -> clean
 	if [ -e "$INTERFACES".clean ] ; then
 		@ mv "$INTERFACES"{.clean,.new}
@@ -76,9 +62,6 @@ if ! [ -z $BOOTSTRAP_CLEAN ] ; then
 		DFL_DNS=1
 		DFL_FIREWALL=SKIP
 
-		# NOTE: in general this is non-destructive and can be done inline.
-		__finalize
-
 	# stage 2: clean -> final
 	elif [ -e "$INTERFACES".final ] ; then
 		@ mv "$INTERFACES"{.final,.new}
@@ -89,8 +72,6 @@ if ! [ -z $BOOTSTRAP_CLEAN ] ; then
 		DFL_DNS=SKIP
 		DFL_FIREWALL=1
 
-		# NOTE: __finalize is deferred to just before reboot...
-
 		REBOOT=1
 
 	# done
@@ -98,6 +79,15 @@ if ! [ -z $BOOTSTRAP_CLEAN ] ; then
 		exit
 	fi
 
+	if reviewApplyChanges "$INTERFACES" ; then
+		# XXX this must be done in nohup to avoid breaking on connection lost...
+		if ! @ ifreload -a ; then
+			# reset settings back if ifreload fails...
+			@ cp "$INTERFACES"{.bak,}
+			@ ifreload -a	
+		fi
+	fi
+
 # Bootstrap...
 elif ! [ -z $BOOTSTRAP ] ; then
 	DFL_BOOTSTRAP_PORT=${DFL_BOOTSTRAP_PORT:-none}
@@ -117,20 +107,20 @@ fi
 
 #----------------------------------------------------------------------
 
-# system...
+# System...
 if xreadYes "# Update system?" UPDATE ; then
 	@ apt update
 	@ apt upgrade
 fi
 
 
-# tools...
+# Tools...
 if xreadYes "# Install additional apps?" APPS ; then
 	@ apt install ${SOFTWARE[@]}
 fi
 
 
-# bridges...
+# Bridges...
 if xreadYes "# Create bridges?" BRIDGES ; then
 	xread "WAN port: " WAN_PORT 
 	xread "ADMIN port: " ADMIN_PORT 
@@ -213,7 +203,7 @@ if xreadYes "# Create bridges?" BRIDGES ; then
 	fi
 
 	# interfaces
-	if reviewApplyChanges "$INTERFACES" apply ; then
+	if reviewApplyChanges "$INTERFACES" ; then
 		# XXX this must be done in nohup to avoid breaking on connection lost...
 		if ! @ ifreload -a ; then
 			# reset settings back if ifreload fails...
@@ -231,7 +221,7 @@ if xreadYes "# Update /etc/hosts?" HOSTS ; then
 	@ sed -i \
 		-e 's/^[^#].* \(pve.local.*\)$/'${HOST_ADMIN_IP/\/*}' \1/' \
 		/etc/hosts.new
-	reviewApplyChanges /etc/hosts apply
+	reviewApplyChanges /etc/hosts
 fi
 
 
@@ -250,7 +240,7 @@ if xreadYes "# Update DNS?" DNS ; then
 	build
 	file=/etc/resolv.conf
 	@ cp "staging/${file}" "${file}".new
-	reviewApplyChanges "${file}" apply
+	reviewApplyChanges "${file}"
 fi
 
 
@@ -259,7 +249,7 @@ if xreadYes "# Update firewall rules?" FIREWALL ; then
 	build
 	file=/etc/pve/firewall/cluster.fw
 	@ cp "staging/${file}" "${file}".new
-	reviewApplyChanges "${file}" apply
+	reviewApplyChanges "${file}"
 fi
 
 
@@ -267,14 +257,6 @@ showNotes
 echo "# Done."
 
 
-# finalize...
-if [[ $( type -t __finalize ) == "function" ]] ; then
-	echo "# Finalizing ${INTERFACES}..."
-	__finalize
-fi
-
-
-# reboot...
 if ! [ -z $REBOOT ] ; then
 	echo "# Rebooting..."
 	@ reboot

ssh/make.sh

@@ -24,10 +24,10 @@ readConfig
 DFL_ID=${DFL_ID:=120}
 DFL_CTHOSTNAME=${DFL_CTHOSTNAME:=ssh}
 
-DFL_CORES=${DFL_SSH_CORES:=1}
+DFL_CORES=${DFL_CORES:=1}
-DFL_RAM=${DFL_SSH_RAM:=512}
+DFL_RAM=${DFL_RAM:=1024}
-DFL_SWAP=${DFL_SSH_SWAP:=${DFL_RAM}}
+DFL_SWAP=${DFL_SWAP:=${DFL_RAM}}
-DFL_DRIVE=${DFL_SSH_DRIVE:=16}
+DFL_DRIVE=${DFL_DRIVE:=16}
 
 WAN_IP=SKIP
 WAN_GATE=SKIP